'***************************************************************************************************************
'*                                    INTEL DISCLOSURE And COPYRIGHT INFORMATION                              '*
'*                                                                                                            '*  
'*                THIS DOCUMENT AND ALL INFORMATION PROVIDED HEREIN, INCLUDING CODE, IS PROVIDED              '*  
'*                "AS IS" WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY,           '*
'*                NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE              '* 
'*                ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE.                                       '*
'*                Intel disclaims all liability, including liability for infringement of any proprietary      '*
'*                rights, relating to use of information or code in this document.   Recipient may use        '*
'*                this document and all information herein, including code, but all such use is and shall     '*
'*                be at recipient's sole risk and subject to the disclaimers and limitations of liability     '*
'*                herein.  No other license, express or implied, by estoppel or otherwise, to any             '*  
'*                intellectual property rights is granted herein.                                             '*  
'*                Copyright (c) Intel Corporation 2008. *Third-party brands and names are                     '*  
'*                the property of their respective owners.                                                    '*  
                                                                                                       
'***************************************************************************************************************

' File              :     VLAN_EnumerateVlansOnTeam.VBS
' Version           :     1.0
'
'  Purpose :   Used to list all the VLAN's on a team
'                   
'
'  Arguments : VLAN_EnumerateVlansOnTeam.vbs <TeamIndex> [target username password] [help]
'
'               <TeamIndex>  - Index of the Team to use
'               <remote>      - the name of a remote computer; requires the following:
'               <username>    - user name
'               <password>    - password
'
'
'  Instructions for use:
'  =====================
'  1) Execute script by invoking "cscript VLAN_EnumerateVlansOnTeam.vbs" from the command line with arguments listed above
'  2) The common script library vbslib.vbs must be located in the same directory
'
'***************************************************************************************************************
   Option Explicit
   On Error Resume Next
   Include "VBSLIB.vbs"

     Const SCRIPT_NAME = "VLAN_EnumerateVlansOnTeam.vbs"
     Const SCRIPT_DESCRIPTION = "Used to list all the VLAN's on a team"

     'Global variables
     Dim internalTeamIndex, TeamIndex
     Dim Target, Username, Password
     Dim WbemServices
     Dim sError
     
     
     ' Check command line is correct
     If ParseCommandLine(TeamIndex,Target, Username, Password) = false then 
          PrintScriptHelp
          Wscript.Quit 0
     End if

     ' Connect
     If WMIConnect(WbemServices, "root\Intelncs2", Target, Username, Password, sError) = false then
          Wscript.Echo "Failed to connect to WMI namespace. " & VbNewLine
          wscript.echo "Make sure Intel(R) Network Connections software is installed."
          Wscript.Quit 0
     End if    

     ' Enumerate teams
     dim TeamList
     TeamList = EnumerateTeams(WbemServices, sError)

     ' Check that there are teams on the system
     if IsNothing(TeamList)then
          wscript.Echo "No teams found on the system."
          wscript.quit 0
     end if

     InternalTeamIndex = TeamIndex - 1

     ' Verify the team specified is a valid index, bail if not
     if (InternalTeamIndex < 0) then
          wscript.echo "Invalid team index. Team index must be greater than 0"
          wscript.quit 0
     elseif (InternalTeamIndex > ubound(TeamList)) then
          wscript.echo "Team index not found: " & TeamIndex
          wscript.quit 0
     end if
     
     dim VlansOnTeam : set VlansOnTeam = EnumerateVlansOnDevice(WbemServices, TeamList(internalTeamIndex))

    if not IsNothing(VlansOnTeam) then
    	if VlansOnTeam.Count <> 0 then

		' Display the VLAN name
		wscript.echo TeamIndex & ") " & TeamList(internalTeamIndex).Name & VbNewLine
		dim VlanObj 
		for each VlanObj in VlansOnTeam
			wscript.echo "   " & VlanObj.VlanNumber & ") " & VlanObj.VlanName 
		next     
	    else
		' Display the Team name
		wscript.echo TeamIndex & ") " & TeamList(internalTeamIndex).Name & ": TeamIndex " & TeamIndex & " VLANs :" & VbNewLine
		wscript.echo "   No VLAN's created for TeamIndex " & TeamIndex 

	   end if    
    else
         ' Display the Team name
         wscript.echo TeamIndex & ") " & TeamList(internalTeamIndex).Name & ": TeamIndex " & TeamIndex & " VLANs :" & VbNewLine
         wscript.echo "   No VLAN's created for TeamIndex " & TeamIndex 
    end if    

   wscript.Quit 0
          

     
'===================================================
' Function       : ParseCommandLine
' Purpose        : Evaluates command line arguments passed to the script and determines If they are correct
' Arguments      :     
'               
'               TeamIndex - Index of the Team to use
'               sTarget - the name of a remote computer
'               sUserName - the user name for remote authentication
'               sPassword - the password for remote authentication
'
' Returns :      True (If the command line has the correct format), False otherwise
' Notes   :      User name can be in the form of either a user name or a Domain\argUserName
'                    'Help' will return false - the script does not need to do anything else
'===================================================
Function ParseCommandLine (byref TeamIndex, byref sTarget, byref sUserName, byref sPassword)

     Err.Clear
     On Error Resume Next
     
     'Capture command line arguments
     Dim cmd_args : Set cmd_args = wscript.Arguments
     
     'Check number of command line arguments and exit If it is not correct
     Select Case cmd_args.count
          Case 1 
            ' if the only command line arg is 'help' return false so the script help will be displayed
	    If instr(LCase(cmd_args(0)), "help") > 0 Then
		 ParseCommandLine = false
		 Exit Function
	    else
		 if IsNumeric(cmd_args(0)) then
		      TeamIndex = CInt(cmd_args(0))
		      sTarget = "."
		      sUserName = ""
		      sPassword = ""
		      ParseCommandLine = true
		      exit function
		 end if
	    End If                         
               
          Case 4
	      ' Check if the first arg (index #) is not a number or if sClass/sPropertyName is and bail
	      if not IsNumeric(cmd_args(0)) then
		   ParseCommandLine = false
		   exit function
	      end if
	      
	      TeamIndex = CInt(cmd_args(0))
	      sTarget = cmd_args(1)
	      sUserName = cmd_args(2)
	      sPassword = cmd_args(3)
	      ParseCommandLine = true
	      Exit Function  
	      
          End Select
     'Return failure
     ParseCommandLine = False
     
End Function
     

'===================================================
'       Sub : PrintScriptHelp
'   Purpose :  Prints command line help for the user
'                   on how to use this script
'===================================================
Sub PrintScriptHelp
                
     Wscript.Echo  "Usage :" & VbNewLine & VbNewLine &_
                         "  " & SCRIPT_NAME & " <TeamIndex> [target username password] [help]" & VbNewLine & VbNewLine &_
                         "  Required: " & VbNewLine &_
                         "    " & TeamIndexString & VbNewLine &_
                         "                   " & TeamGetIndexString & VbNewLine & VbNewLine &_
                         OptionalCmdLineArgsString

End Sub
     
' DO NOT REMOVE THIS FUNCTION
Function Include(vbsFile)

     Dim fso, ts, buf, path
     Set fso = CreateObject("Scripting.FileSystemObject")

     path = fso.GetParentFolderName (WScript.ScriptFullName) & "\" & vbsFile

     If fso.FileExists(path) Then  
          set ts = fso.OpenTextFile(path)
          buf = ts.ReadAll()
          ts.Close()
          Executeglobal buf
     Else
          Wscript.Echo "Unable to open include file: " & path
          Wscript.Quit 0
     End If

End function
