================================================================================
NEC NEC Express5800/B120a
NEC NEC Express5800/B120b
NEC NEC Express5800/B120b-Lw
NEC NEC iStorage NS500Ba
System BIOS 1.0.3042
================================================================================
Software name    : NEC NEC Express5800/B120a, NEC NEC Express5800/B120b, NEC 
                   NEC Express5800/B120b-Lw, NEC NEC iStorage NS500Ba
                   System BIOS update module for Windows
Models           : NEC NEC Express5800/B120a
                   NEC NEC Express5800/B120b
                   NEC NEC Express5800/B120b-Lw
                   NEC NEC iStorage NS500Ba
Operating System : This software supports the following OS                   
                   - Windows Server(R) 2003
                   - Windows Server(R) 2008
Target Users     : See [Target Users for Update] below
Type             : System BIOS
================================================================================
[ About the software ]

The NEC NEC Express5800/B120a, NEC NEC Express5800/B120b, NEC NEC Express5800/
B120b-Lw, NEC NEC iStorage NS500Ba System BIOS Update Module supports the 
following functional enhancement in the NEC NEC Express5800/B120a, NEC NEC 
Express5800/B120b, NEC NEC Express5800/B120b-Lw, NEC NEC iStorage NS500Ba 
models:

  - MicroCode Update for Intel(R)Xeon(R)Processor L5600/E5600/X5600 series

Attention:
  * Incorrect update could result in the problems such as failure to boot the 
    system. Update the system following the instructions in this document to 
    prevent the error in operation. Unexpected accidents such as power failure, 
    lightning strike, interrupt and noise during the system update may damage 
    the device or make the system malfunction in the worst case. Be noted that 
    you may need to pay for the repair fee for the above cases.
  
  * When Windows(R) BitLocker(TM) function is set to "Enabled", update the 
    system BIOS after making the function "Disabled". Then make the function "
    Enabled" after update and reboot of the system. If you update the system 
    BIOS without making the function "Disabled", you may need the recovery 
    password when you boot the system.
  
  * When you use Hyper-V Ver.1.0 of Windows Server(R) 2008, do not select "ACPI 
    C2" in the Processor C3 Report selection menu in the SETUP menu. If you 
    select "ACPI C2", it could result in much-delay of the system time display 
    on the Guest OS.
  
  * This software does not support virtualization environment.


-------------------------------------------------------------------------------
[ Target Users for Update ]
This software is available for the users who use the following models with the 
following BIOS Version.

  - Models to be supported
     1.NEC NEC Express5800/B120a 
     2.NEC NEC Express5800/B120b 
     3.NEC NEC Express5800/B120b-Lw 
     4.NEC NEC iStorage NS500Ba 

  - BIOS Versions to be supported
      1. 1.0.0013
      2. 1.0.0018
      3. 1.0.0024
      4. 1.0.1026
      5. 1.0.2028
      6. 1.0.2030
      7. 1.0.3035
      8. 1.0.3040
Note: You do not need to update the system BIOS when its version is newer than 
the above version since it has already included the equivalent enhancements.

You can check the BIOS Version with the following procedure.

    1. Start "System Information".
       (Start->Programs->Accessories->System Tools->System Information)
    2. Select "System Summary".
    3. Check the BIOS version by the profile of "BIOS version/Date".


================================================================================
BIOS Update Procedure
================================================================================
 Update the BIOS following the procedures below.
  1. Log-in the system with a user with administrator privilege of the local
     machine.
  2. Terminate all the running application.
  3. Download the zipped file into any directory of hard disk.
  4. Unzip the file into any directory.
  5. Double-click BiosUpdate.exe in the directory.
  6. Carry out the update following the dialog from the update tool.
     The bar of the update progress will be shown during the update. 
  7. On the "InstallShield Wizard Complete" dialog box shown after the success 
     of the update, select "Yes, I want to restart my computer now." option 
     and press the [Finish] button to restart your computer.
      
   #1 Updated BIOS will work after restarting your computer.
   #2 The log data of the update will be saved in 
       %SystemDrive%\Program Files\NEC\OnlineBiosUpdate forder. 

--------------------------------------------------------------------------------
[Revision history]
09/01/2010   1.0.3042
- MicroCode Update for Intel(R)Xeon(R)Processor L5600/E5600/X5600 series

06/02/2010   1.0.3040
- MicroCode Update for Intel(R)Xeon(R)Processor L5600/E5600/X5600 series
- Supported 8G Fibre Channel Controller(N8403-034)
- The following problem was corrected.
  When using the Wake ON LAN function, the machine is turned on automatically
  after OS shut down
  (This phenomenon occurs only in system BIOS Rev1.0.3035)

03/04/2010   1.0.3035
- Supported Intel(R)Xeon(R)Processor L5600/E5600/X5600 series

12/14/2009   1.0.2030
- MicroCode Update for Intel(R)Xeon(R)Processor L5500/E5500/X5500 series

10/22/2009   1.0.2028
- Supported Windows Server(R) 2008 R2
- Supported VM Ware ESXi 4.0

06/24/2009   1.0.1026
- Supported vIO Control Function

06/01/2009   1.0.0024
- Supported Extension HDD Blade AD106a(N8404-001)

03/16/2009   1.0.0018
- MicroCode Update for Intel(R)Xeon(R)Processor L5500/E5500/X5500 series

02/11/2009   1.0.0013
- MicroCode Update for Intel(R)Xeon(R)Processor L5500/E5500/X5500 series

--------------------------------------------------------------------------------
[Copyright and Trademark]

All contents on this software are the copyright of NEC Corporation or the 
third-party software developer.

Microsoft, Windows, Windows Server, Windows Vista, BitLocker are trademarks or 
registered trademarks of Microsoft Corporation in the United States and other 
countries.

All other company names and product names mentioned herein are registered 
trademarks or trademarks of their respective owners.

