================================================================================
 N8103-142 SAS Controller driver for Windows Server 2012 
                                                                  (ver 2.0.60.2)
================================================================================
                                                                NEC Corporation
                                                                  April 2013
[Table of contents]
1.About the software
2.Models
3.Driver install procedures  
4.Notes
5.Update history
6.Trademarks and copyright
--------------------------------------------------------------------------------

1.About the software
 "N8103-142 SAS Controller driver for Windows Server 2012" ("the Software"),
  for Windows Server 2012 will make the enhancements or solve the issues 
  for NEC Express5800 server products as below.

2.Models
  Refer to NEC Express5800 Download Site

3.Driver install procedures

 Perform the following steps to extract the Software and install the driver.

 -Confirm Driver version.

 (1) Boot the system and log in it using administrator.

 (2) Run Explorer and open the following folder.

      %SYSTEMROOT%\system32\DRIVERS

    *Note*
     SYSTEMROOT's default is C:\WINDOWS

 (3) Open the properties of "%SYSTEMROOT%system32\DRIVERS\lsi_sas2.sys".

 (4) Click [Details] tab and confirm the [File version].

 If the File version is 2.0.60.2 or over, you don't need to setup driver.

 - How to extract:
 (1) Download 421430-A01_xxxxxx.zip(xxxxx is an expression of arbitrary numbers)
     to any directory. (for example, "C:\TEMP" folder) 
 (2) Extract 421430-A01_xxxxxx.zip(xxxxx is an expression of arbitrary numbers).
     Note: You must not use the folder with the name including space (" ")
     in extracting the zip file.
 
 - How to install:
 (1) Execute Update.vbs(unziped files) using an appropriate tool 
     such as Explorer.
 (2) The following message appears. Please click [Yes].
     [Do you want to setup the LSI Adapter, SAS2 2008 Falcon driver?]
     Start driver update.
 (3) The following message appears. Please reboot the system after click [OK].
     [This setup finished successfully. Please restart the system.]

 (4) After restart system, confirm Driver version following procedure.
     1) Run Explorer and open the following folder.
      %SYSTEMROOT%\system32\DRIVERS
     2) Open the properties of "%SYSTEMROOT%system32\DRIVERS\lsi_sas2.sys".
     3) Click [Details] tab and confirm the [File version].
     4) Confirm to File version is 2.0.60.2.

4.Notes
  Notes is nothing

5.Update history
  April 2013
   <Enhancements to be made>
   1)Support Windows Server 2012

6.Trademarks and copyright
  *Microsoft, Windows, Windows Server are registered trademarks or trademarks of
   Microsoft Corporation in the United States and other countries.
  *LSI and the LSI logo design are trademarks or registered trademarks of 
   LSI Corporation.
  *All other product, brand, or trade names used in this publication are the 
   trademarks or registered trademarks of their respective trademark owners.
