================================================================================
NEC Express5800/T120b-E
NEC Express5800/T120b-M
NEC Express5800/GT120b
System BIOS 4.6.8A25
================================================================================
Software name    : NEC Express5800/T120b-E, NEC Express5800/T120b-M, NEC 
                   Express5800/GT120b
                   System BIOS update module for Windows
Models           : NEC Express5800/T120b-E
                   NEC Express5800/T120b-M
                   NEC Express5800/GT120b
Operating System : This software supports the following OS                   
                   - Windows Server(R) 2003
                   - Windows Server(R) 2008
Target Users     : See [Target Users for Update] below
Type             : System BIOS
================================================================================
[ About the software ]

The NEC Express5800/T120b-E, NEC Express5800/T120b-M, NEC Express5800/GT120b 
System BIOS Update Module supports the following functional enhancement in the 
NEC Express5800/T120b-E, NEC Express5800/T120b-M, NEC Express5800/GT120b models:

  - Updated critical microcode for Intel(R)Xeon(R) Processor 5600/5500 series

Attention:
  * Incorrect update could result in the problems such as failure to boot the 
    system. Update the system following the instructions in this document to 
    prevent the error in operation. Unexpected accidents such as power failure, 
    lightning strike, interrupt and noise during the system update may damage 
    the device or make the system malfunction in the worst case. Be noted that 
    you may need to pay for the repair fee for the above cases.
  
  * When Windows(R) BitLocker(TM) function is set to "Enabled", update the 
    system BIOS after making the function "Disabled". Then make the function "
    Enabled" after update and reboot of the system. If you update the system 
    BIOS without making the function "Disabled", you may need the recovery 
    password when you boot the system.
  
  * When you use Hyper-V Ver.1.0 of Windows Server(R) 2008, do not select "ACPI 
    C2" in the Processor C3 Report selection menu in the SETUP menu. If you 
    select "ACPI C2", it could result in much-delay of the system time display 
    on the Guest OS.
  
  
  * This software does not support a virtualized environment such as hyper 
    visor, guest OS, etc. Please update either on the OS which this software 
    supports or with the method of offline update.
  


-------------------------------------------------------------------------------
[ Target Users for Update ]
This software is available for the users who use the following models with the 
following BIOS Version.

  - Models to be supported
     1.NEC Express5800/T120b-E 
     2.NEC Express5800/T120b-M 
     3.NEC Express5800/GT120b 

  - BIOS Versions to be supported
     1. 4.6.0A11
     2. 4.6.0A13
     3. 4.6.0A14
     4. 4.6.0A15
     5. 4.6.2A18
     6. 4.6.3A19
     7. 4.6.6A23
     8. 4.6.7A24
     
Note: You do not need to update the system BIOS when its version is newer than 
the above version since it has already included the equivalent enhancements.

You can check the BIOS Version with the following procedure.

    1. Start "System Information".
       (Start->Programs->Accessories->System Tools->System Information)
    2. Select "System Summary".
    3. Check the BIOS version by the profile of "BIOS version/Date".


================================================================================
BIOS Update Procedure
================================================================================
 Update the BIOS following the procedures below.
  1. Log-in the system with a user with administrator privilege of the local
     machine.
  2. Terminate all the running application.
  3. Download the zipped file into any directory of hard disk.
  4. Unzip the file into any directory.
  5. Double-click BiosUpdate.exe in the directory.
  6. Carry out the update following the dialog from the update tool.
     The bar of the update progress will be shown during the update. 
  7. On the "InstallShield Wizard Complete" dialog box shown after the success 
     of the update, select "Yes, I want to restart my computer now." option 
     and press the [Finish] button to restart your computer.
      
   #1 Updated BIOS will work after restarting your computer.
   #2 The log data of the update will be saved in 
       %SystemDrive%\Program Files\NEC\OnlineBiosUpdate folder. 

--------------------------------------------------------------------------------
[Revision history]
01/14/2014   4.6.8A25
- Updated critical microcode for Intel(R)Xeon(R) Processor 5600/5500 series

08/02/2012   4.6.7A24
- Issue correction of Intel(R) Xeon(R) Processor 5600 series
   This update resolves an issue on the Intel(R) Xeon(R) Processor 5600 series
   that occurred a system hang/reboot/Memory Error when the system is return 
   from energy efficient state.

05/17/2012   4.6.6A23
- A Master Boot Record verification procedure has been enforced to boot
  the correct disk device when the disk devices are added.
- A sleep state (S3) definition which is not supported has been removed.
- Update Intel(R) Processor Microcode.
  This Microcode update includes dealing with problems of SINIT ACM
  (Authenticated Code Module) which is used for Intel(R)TXT.
  * If Intel(R)TXT is disabled in the BIOS, it is not affected by this issue.
    (Factory default setting is disabled.)
  * More information in detail is available at Intel(R) Web site.
    Intel(R) Web site : http://security-center.intel.com/

02/21/2011   4.6.3A19
- Use restrictions are removed that extension Intel SpeedStep(R) technology
  (EIST) in the Intel (R)Xeon(R) processor E5606 deployment model.
- A functional enhancement to support a specific PCI card having a Security 
  capability.

01/18/2011   4.6.2A18
- Enhancement of support of Processor Power saving mode.
   - Addition of a BIOS SETUP "Advanced" Processor C6 Report setting item.
- A functional update that does not change the Boot order before and after
  implementing a cartridge, When use N8151-86 built-in RDX(USB) or N8160-84
  external RDX.

10/27/2010   4.6.0A15
- Updated microcode for Intel(R) Xeon(R) Processor 5600 series
   - This is Intel(R) Xeon(R) Processor 5600 series microcode. 
     This update resolves an issue on the Intel(R) Xeon(R) 
     Processor 5600 series(Westmere-EP) that occurred a 
     system hang/reboot/Memory ECC Error when the system is 
     return from energy efficient state(Package C6 State).

10/01/2010   4.6.0A14
- Updated critical microcode for Intel(R)Xeon(R) Processor E5600/L5600 series.

08/18/2010   4.6.0A13
- After executing Load Setup Default of the BIOS SETUP menu, 
  it modified about the fault which POST may stop rarely. 

--------------------------------------------------------------------------------
[Copyright and Trademark]

All contents on this software are the copyright of NEC Corporation or the 
third-party software developer.

Microsoft, Windows, Windows Server, Windows Vista, BitLocker are trademarks or 
registered trademarks of Microsoft Corporation in the United States and other 
countries.

All other company names and product names mentioned herein are registered 
trademarks or trademarks of their respective owners.

