=========================================================================================================
Express5800/T110h-SAExpress5800/T110hAExpress5800/R110h-1
BMCt@[EFA 02.08 , SDR Revision 04 [Xm[g (Linux)
=========================================================================================================
                                                                                        {dC
                                                                                               2016N4
yڎz
  1.\tg̏Љ
  2.Ώۋ@
  3.CXg[@
  4.ӎ
  5.ŗ
  6.Wђ쌠
---------------------------------------------------------------------------------------------------------

1.\tg̏Љ
́uExpress5800/T110h-SAExpress5800/T110hAExpress5800/R110h-1 BMCt@[EFA/SDR Abvf[g
W[(ȉu{\tgEFAvƂ܂B)v́A@\ɑΉBMCt@[EFA/SDR łB
ύXȅڍׂ́u5 ŗvQƂB

Ӂ
   * Abvf[gƖ{̑uNȂȂ铙̏Q邱Ƃ܂B
     {Ō܂ł悭ǂ݌둀̂Ȃ悤Abvf[gsĂB
     ܂Af[^ɗ\ʃANVfgidAAՒfAmCYjɂ{̑u듮삵
     dؒfꂽ肵܂ƁAň̏ꍇA@킪퓮삵ȂȂ܂B
     ̂悤ȏꍇql̂SŏCKvƂ邱Ƃ܂̂ŏ\ӂB
   * {BMCFWKṕAEFuuEŨLbVNAsĂB
   * zɂẮA{\tgEFA͂gpɂȂ܂B
   * ESMPRO(R)ServerManager Version.6  ExpressUpdate @\p̏ꍇ́Au 2.Ώۋ@ vAu 3.C
     Xg[@ vɂẮAŏsȂ܂̂ŁAu 4.ӎ vȍ~QƂB



2.Ώۋ@
  EΏۂƂȂ@

     1. Express5800/T110h-S
     2. Express5800/T110h
     3. Express5800/R110h-1


  EΏۂƂȂeo[W
    Lo[Wĝql͖{Abvf[gW[̓KpKvłB

    <BMCt@[EFA>
                       BMC Firmware Revision:  02.06


    <SDR>
                       SDR Revision:           xx.03


     ) Lo[WVo[WKpĂꍇ́A{Abvf[gW[Ɠ̋@\
         ɓKpĂ邽߁A{Abvf[g{Kv͂܂B
         SDR Revisionx͔Cӂ̕܂B

   --- o[WmF@ ---

   ȉ̂ꂩ̕@ŁAΏۂƂȂ{̑ũo[WKmFĂ(1)B

  * Abvf[gΏۖ{̑uɂĊmFꍇ *
   <BIOS SETUPł̊mF@>
     Abvf[gΏۖ{̑u̓dAfBXvCʂPOST(Power On Self-Test)̎se\
     n߂܂AʉɁAwPress <F2> to enter SETUPxƂbZ[W\܂̂ŁAb
     Z[Wɏ]A<F2>L[܂B
     BIOS SETUPʂN܂̂ŁA[Server]  [System Management]ւƐi݁A[BMC Firmwere Revision]
     [SDR Revision]ɂāAmFB


  * [gmFꍇ *
   <EXPRESSSCOPE(R)GW3 ł̊mF@>
   [gɂāAEXPRESSSCOPE(R)GW3 gpĂꍇA[VXe]  [IPMI ] 
   IĂB
   EBMCt@[EFÃo[W̊mFB
     [MC]{^  [Basbrd Mgmt Ctlr] IAut@[EFÃrWvɂāAmFB
   ESDR ̃o[W̊mFB
     [SDR]{^ IAŏIR[h ID/ZTʁFOEM SDR IAu[OEM Data]SDR Versionv ɂ
     āAmFB

   <ESMPRO(R)ServerManager Ver.6 ł̊mF@>
   [gESMPRO(R)ServerManager Ver.6 CXg[ĂgpĂꍇA܂AmFꂽ
   Abvf[gΏۖ{̑uǗo^ς݂ł邱ƂmF܂B
   ɁAo[WmFꂽT[oIA[[g]  [IPMI ] IĂB
   EBMCt@[EFÃo[W̊mFB
     [Rg[]  [Basbrd Mgmt Ctlr] IAut@[EFÃrWvɂāAmF
     B
   ESDR ̃o[W̊mFB
     [ZT]  [ZT - Ǘ] IAuSDR ̃o[WvɂāAmFB



3.CXg[@

 3-1.Secure Boot̐ݒmFĉB
     [Enabled]ݒ̏ꍇ́A[Disabled]ɕύXĉB(ftHg̐ݒĺA[Disabled]łB)
     ȂAύXꍇɂ̓Abvf[gI[Enabled]ݒ߂ĉB
       *  Secure Bootݒ : BIOS ZbgAbv[eBeB[(SETUP) - [Security] - [Secure Boot]

 3-2.{\tgEFȀ
      {́AAbvf[gΏۖ{̑ulbg[NɂȂ(WEBANZXs)ꍇ̂ݑΏۂłB
        Abvf[gΏۖ{̑ulbg[Nɂ(WEBANZX)ꍇ́A3-2 ւi݂B
     (1) _E[hĉ𓀂t@CACD-R ܂́AUSB HDD ɁA菇(2)̃tH_̂܂
         ̃tH_\ɂāARs[ĂB
     (2) CD-R ̃Rs[A菇(1)A(2)ɂă_E[hE𓀂n[hfBXNhCu
         t@CEtH_́Aׂč폜ĂB

 3-3.BMCt@[EFA/SDR Abvf[g菇

     ȉ̎菇ɏ]āABMCt@[EFA/SDR ̃Abvf[gsĂB
     s̃AvP[VI邱Ƃ𐄏܂B
     3-1 ɂĖ{\tgEFȀĂȂqĺA(3)ւi݂B

     (1) {\tgEFA CD-R ɃRs[̂gpꍇ́AfBXNhCuɃZbg܂B
         USB_HDD ɃRs[̂gpꍇ́AAbvf[gΏۖ{̑u USB_Port ɐڑ܂B

     (2) {\tgEFAAbvf[gΏۖ{̑u̔Cӂ̃tH_ɃRs[s܂B

     (3) ^[~i([)N܂B

         1). {\tgEFAuꂽtH_ֈړB

         2). ȉ̃VFt@CsĂB

              ./bmcup.sh

        ) {́A_uNbNsł͂ȂAKA^[~i([)s悤A
            B

     (4)ȉ̃bZ[W\܂B

         ####################################################
         #  From now will start the update of BMCFW and SDR #
         #  Please end all the applications.                #
         ####################################################

        svȃAvP[VAL[A<Enter>ĂB
        Abvf[gJn܂(vԁFT)B

     (5) Abvf[gɊ܂Aȉ̃bZ[W\܂B

            Update is successful. Reboot is required for changeover to new FW.

            BMCFW update was complete !!

     (6) ^[~i([)I܂B

     (7) Abvf[gΏۖ{̑u̍ċNs܂B
          ċN̕Kv͂܂񂪁AċNɃAbvf[gBMCt@[EFAł̓Jn
            ܂̂ŁAȂׂċNsƂ߂܂B

     (8) 1 ̂ꂩ̕@ŁAeo[WAL\ƂȂĂ邱ƂmF܂B

             BMC Firmware Revision  :  02.08
             SDR Revision           :  xx.04

     ȏŁABMCt@[EFA/SDR ̃Abvf[g͊łB


4.ӎ

 4-1.^pĊJɍۂĂ̒ӎ
    * BMCWebT[o@\ǗPC炲p̏ꍇABMCt@[EFA/SDR ̃Abvf[gAJĂ
      SẴuEUxIĂ炲pB
    * EFuuEŨLbVNAsĂB

 4-2.BMCt@[EFAAbvf[gc[sAL̓ẽbZ[W\ꍇ܂B

         C4  = The image file does not support this machine.

          EӖFΏۂƂȂ@ȊOɓKp悤ƂꍇɁA\܂B
          EΏ@F"ΏۂƂȂ@"AyсAɑΉ"ΏۂƂȂBMCt@[EFAo[W"
                       mFĂB


         C1  = Invalid parameter.
         C2  = Failed to image file load.
         C3  = The image file is corrupted.
         C4  = The image file does not support this machine.
         C5  = The image file is bigger than flash rom.
         C6  = Update tool does not support this firmware.
         C19 = File open error. (ExUpInfo.xml)
         C20 = Version info. Not exist. (ExUpInfo.xml : <version>)
         C21 = Timeout was generated.
         
          EӖF BMCAbvf[gW[Ă\܂B
          EΏ@FxA{\tgEFA_E[hƂ납A蒼ĂB


         C7 = Error while establishing the session.

          EӖFBMCƂ̒ʐMɃG[܂
          EΏ@Fȉ̎菇
                      1. OtUSBhCuiCD-ROMDVD-ROMjڑĂꍇAOĂB
                      2. BMCZbgsȂA΂炭҂AxAbvf[g
                         sĂB
                      3. 菇2ōēxErrorꍇ́ABMCt@[EFAAbvf[gW[
                         (ItCAbvf[g)B
                      ĂP݂ȂꍇAێT[rXЂւ₢킹
                      B


         C8 = IPMI command error. (Get Device ID)
         C9 = IPMI command error. (Get FW Info)
         C10 = IPMI command error. (Enter FW Update)
         C11 = IPMI command error. (Upload FW Image)
         C12 = IPMI command error. (Get FW Update Status)
         C13 = IPMI command error. (Check FW Image)
         C14 = IPMI command error. (Exec FW Update)
         C15 = Update status error. (Enter FW Update)
         C16 = Update status error. (Upload FW Image)
         C17 = Update status error. (Check FW Image)
         C18 = Firmware update error.

          EӖFAbvf[gɎs܂B
          EΏ@FBMC ZbgsȂA΂炭҂AxAbvf[g
                      sĂB
                      ēxAError ꍇ́AێT[rXЂւ₢킹B


 4-3.SDR(ZTf[^R[h) Abvf[gsAL̓ẽbZ[W\ꍇ܂B

        (a) Can't open IPMI driver.
        (b) This SDR data is not supported.(Not Found HWID in mchk_fil)

          EӖFΏۂƂȂ@ȊOɓKp悤ƂꍇɁA\܂B
          EΏ@F"ΏۂƂȂ@"mFĂB

        (c) Illegal parameter format.

          EӖFp[^słB
          EΏ@FxA{\tgEFA_E[hƂ납A蒼ĂB

        (d) unsupported SparedSDR command on BMC.Or, the time-out is generated 
            by a system high load.

          EӖFSDRAbvf[g@\T|[gĂ܂B̓VXe
                  ׂ̂߃Abvf[gɎs܂B
          EΏ@FBMCt@[EFAAbvf[gčċNsSDRAbvf[g
                      sĂB
                      {̑u׊ɂꍇA׏Ԃ܂ł҂ɂȂ邩A
                      ɋNĂAvP[VIĂAxAAbvf[g
                      sĂB

        (e) Timeout was generated.
        (f) Get Device ID Command Error.
        (g) insufficient memory.
        (h) SDR record read error from BMC.
        (i) failed to clear the SDR repository.
        (j) failed to receive BMC response, bad completion code.
        (k) IPMI command retry error.
        (l) failed to open IPMI Driver.
        (m) failed to send IPMI command.
        (n) IPMI command error for Backup/GetSdrVersion.
        (o) Backup File I/O error.
        (p) SDR file does not match with what was programmed into memory.
        (q) SDR file unsuccessfully written.
        (r) It failed in retrying of MSDriver. A high load of the system is thought as a cause.

          EӖF VXêׂ߃Abvf[gɎs܂B
          EΏ@F{̑u׊ɂꍇA׏Ԃ܂ł҂ɂȂ邩A
                      ɋNĂAvP[VIĂAxAAbvf[g
                      sĂB


5.ŗ

2016/04/20 BMCFW Revision 02.08, SDR Revision xx.04

BMCF
 Edjbg̔璷Ԃ댟oP
 E[gKVM𕡐NԂŁA쌠̈Ϗɉʂ_P
 EpLAN|[ggpADC ON܂̓VXeċNsꂽꍇɁA
   u➑̃Cg[W LANƂ̐ڑOꂽv
   SELo^邱Ƃ錏P
 EWebR\[̐ݒlύXɂāAꕔ̐ݒ荀ڂɂāu'vu#v
   ܂ޕݒłȂ悤ύX
 EWebR\[̐ݒlύXɂāASNMPʕݒ̃R~jeB
   u-vAu_vgp\Ƃ悤ɕύX

SDRF
 EΉIvVɂxZT̍ő吳l̐ݒύX܂B


6.Wђ쌠
{\tgEFA̒쌠͓{dCЁA͊JłO҂ɋA܂B
ExpressUpdateAEXPRESSSCOPEAESMPRO ͓{dCЂ̓o^WłB

MicrosoftAWindowsAWindows Server ́AčMicrosoft Corporation ̕čyт̑̍ɂo^W
܂͏WłB

Linux  Linus Torvalds ̕čт̑̍ɂo^W܂͏WłB

Red HatARPḾARed Hat, Inc. ̏W܂͓o^WłB

{\tgEFÁAGNU General Public License ܂ GNU Lesser General Public License ɊÂA
\tgEFAgpĂ܂B

GRID́Ačт̑̍ɂNVIDIA Corporation̓o^W܂͏WłB

̑ALڂĂЖAíAeЂ̓o^W܂͏WłB

