﻿================================================================================
Express5800/R120h-1E
Express5800/R120h-2E
System ROM U31 v1.32 (02/01/2018)
================================================================================
Software name    : Express5800/R120h-1E, Express5800/R120h-2E
                   System ROM (BIOS) update module
Models           : Express5800/R120h-1E
                   Express5800/R120h-2E
Operating System : This software supports offline update and the following OS.
                   - Windows Server(R) 2012 R2
                   - Windows Server(R) 2016
                   - Red Hat(R) Enterprise Linux(R) 7
Target Users     : See [Target Users for Update] below
Type             : System ROM
================================================================================


[About the software]
The Express5800/R120h-1E, Express5800/R120h-2E System ROM (BIOS) update module
supports the following changes in the Express5800/R120h-1E, Express5800/R120h-2E
models:

  Problems Fixed:
 - Updated microcode for Intel(R) Xeon(R) Scalable Processors.
   This version mitigates security vulnerability of INTEL-SA-00088 in Intel
   Corporation.
 
 - Addressed an issue where the system may experience an erroneous boot-time
   message and Integrated Management Log (IML) entry stating that Core Boost
   Technology is disabled due to a lack of an iLO Advanced License (531 -
   Core Boost Technology missing required iLO License). 

  ** Program and data included in this software **
 Following program and data are included in this software.
 Use one of them according to the way of installation.

  a) Flash image for System Utilities/iLO Web User Interface
     firmware\U31_1.32_02_01_2018.signed.flash

  b) Executables for Windows(R)
     winx64\cp034840.exe

  c) RPM package for Linux(R)
     Linux\firmware-system-oem-u31-1.32_2018_02_01-1.1.x86_64.rpm

-------------------------------------------------------------------------------
[ Target Users for Update ]
This software is available for the users who use the following models with the
following System ROM version.

  - Models to be supported

     1. Express5800/R120h-1E
     2. Express5800/R120h-2E

  - System ROM Versions to be supported

     1. U31 v1.20 (08/18/2017)
     2. U31 v1.22 (09/29/2017)
     3. U31 v1.26 (11/14/2017)

Note: In case of using newer System ROM from the above version, it has already
      applied equivalent enhancements. Updating the System ROM isn't needed.

Be sure to check the System ROM version and date with the following procedures.
Select an arbitrary procedure and check the version before and after the update.

 ** System Utilities **

 You can check the System ROM version and date by the following procedure.

    1. Power on the system and the contents of process by POST (Power On Self-
       Test) will be shown on the screen. After a short time, the following
       message is shown. Press <F9> key, "System Utilities" is started.

                        [F9] System Utilities

    2. After starting "System Utilities", select "System Information".

    3. Select "Firmware Information".

    4. Each firmware version is shown on the screen. The System ROM version and
       date can be seen at "System ROM" option.

  Note: After checking the System ROM version, press the <ESC> key or
        select "Exit" to exit the System Utilities.

  Note: About detail of "System Utilities" usage, refer to "1. System
        Utilities" section in the chapter of "Useful Features" of the
        maintenance guide.

 ** Windows(R) OS **

 You can check the System ROM date by a following procedure.

    1. Hold down <Windows> key and press <R> key.

    2. In the "Run" dialog box, type "msinfo32" and then click "OK".

    3. After "System Information" has started, select "System Summary".

    4. Check the System ROM version by the profile of "BIOS Version/Date".

 ** Linux(R) OS **

 You can check the System ROM date by a following procedure.

    1. Launch the terminal such as xterm.

    2. Execute the command as follows.

        # /usr/sbin/dmidecode | less

        Note: "#" means prompt. You do not need to input "#".

    3. Check the System ROM date by "BIOS Information->Release Date".

    Note: The dmidecode command has to be installed.

================================================================================
 System ROM Installation Procedure
================================================================================

 ** System Utilities **

 [ Preparation ]
  - USB memory x1

  1. Preparation of flash image (*.flash)
   (1) Prepare the USB memory that is formatted with FAT or FAT32.
   
   (2) Copy "a) Flash image for System Utilities/iLO Web User Interface file"
       (approx. size 32MB) to a USB memory.

  2. System ROM installation procedure
     Install the System ROM by a following procedure.

   (1) Attach the USB memory created in the procedure of "1" and power on the
       system.

   (2) In POST, press <F9> key to enter System Utilities.
   
   (3) Select "Embedded Applications > Firmware Update > System ROM" menu.

   (4) Choose "Select Firmware File", and then select the device in which flash
       image was copied.
   
   (5) Select flash image (i.e. *.flash).

   (6) Select "Start Firmware Update".

   (7) When the popup message of "Press ENTER to start firmware update.
       This process might take a few minutes..." is shown, press <ENTER> key.
       Update process is started.

   (8) The progress of the update is shown. When it's completed, the popup
       message of "Firmware update completed successfully." is shown. Press
       <ENTER> key, the message is closed.

   (9) Detach the Installation USB memory from the system.
   
   (10) Reboot the system; Select the "Reboot the System" option at top
        level menu of System Utilities.

   (11) Wait reboot completion for update to take effect.

     The installation is successfully finished.

 ** iLO Web User Interface **

  1. Preparation of flash image (*.flash)

   (1) Copy "a) Flash image for System Utilities/iLO Web User Interface file"
       (i.e. *.flash) to any location which is accessible from the remote PC.

  2. System ROM installation procedure

   (1) Start the Web Browser on remote PC. And log-in to the iLO Web User
       Interface by a "Configure to iLO Settings" privilege user.

   (2) Select "Firmware & OS Software tab" from the right menu.

   (3) Select "Update Firmware" from the left menu.

   (4) Select the flash image, copied by a procedure of "1."

   (5) Press "Flash" to begin update process.

   (6) Wait for the "Firmware Update Completed." message to display.

   (7) Reboot the system.

   (8) Wait reboot completion for update to take effect.

     The installation is successfully finished.

 ** Windows(R) OS **

  1. Preparation of Installation

   (1) Log on to the system as a user with administrator privilege.

   (2) Terminate all running application.

   (3) Copy "b) Executables for Windows(R) file" to a suitable
       folder.

  2. System ROM installation procedure

   (1) Double-click "b) Executables for Windows(R) file" (i.e. *.exe).
       The System ROM Update Program will start.

   (2) Follow the messages will be shown and complete the operation.

   (3) If the messages requesting reboot will be shown, select "yes" to reboot
       of the system.

   (4) Wait reboot completion for update to take effect.
       
     The installation is successfully finished.

 ** Linux(R) OS **

  1. Preparation of Installation

   (1) Log-in as root. Or switch to root with "su" command.

   (2) Terminate all running application.

   (3) Copy "c) RPM package for Linux(R) file" to a suitable directory.

       e.g. /root 

  2. System ROM installation procedure

    (1) Install the RPM package of this System ROM update module by the command
       below.

        # rpm -Uvh <filename>.rpm

        Note: The "<filename>.rpm" should replace to RPM package name which
              is described at above "Binaries of this release" section.

        Note: "#" means prompt. You do not need to input "#".
 
   (2) See where the files land by the command below.

        # rpm -qlp <filename>.rpm

   (3) Change to the directory you see in the previous step.

   (4) Run setup by the command below.

        # ./setup

   (5) Follow the messages will be shown and complete the operation.

   (6) If a reboot inquiry is appear then press "y" to trigger reboot.

   (7) Wait reboot completion for update to take effect.
        
      The installation is successfully finished.

 ** Other OSes (e.g. VMware(R), etc.) **
 Use the one of following procedures to update:
 - Install the System ROM from System Utilities
 - Install the System ROM from iLO Web User Interface

================================================================================
 Notes
================================================================================
  ** Notes in general **

  * Refer to "license_en.txt" about the user license agreement.

  * When you install the system ROM, the flashing mechanism writes over the
    backup ROM and saves current ROM as a backup, enabling you to switch easily
    to the alternate ROM version if the new ROM becomes corrupted for any
    reason. This feature protects the existing ROM version, even if you
    experience a power failure while flashing the ROM.

  * When Windows(R) BitLocker(TM) function is set to "Enabled", install the
    System ROM after making the function "Disabled". Then make the function
    "Enabled" after install and reboot of the system. If you install the system
    ROM without making the function "Disabled", you may need the recovery
    password when you boot the system.

  * This software does not support a virtualized environment such as hyper
    visor, guest OS, etc. Please install either on the OS which this software
    supports or with the method of offline installation.

  ** Note for Windows(R) OS environment and Linux(R) OS environment **

  * This software will access to iLO5 (Baseboard Management Controller). It is
    required that the "iLO 5 Channel Interface Driver" (CHIF) must be installed.
    The CHIF driver can be installed by using EXPRESSBUILDER or "Starter pack".

--------------------------------------------------------------------------------
[Revision history]
Version:1.32 (02/01/2018)

 Problems Fixed:
 - Updated microcode for Intel(R) Xeon(R) Scalable Processors.
   This version mitigates security vulnerability of INTEL-SA-00088 in Intel
   Corporation.

 - Addressed an issue where the system may experience an erroneous boot-time
   message and Integrated Management Log (IML) entry stating that Core Boost
   Technology is disabled due to a lack of an iLO Advanced License (531 -
   Core Boost Technology missing required iLO License). 

Version:1.26 (11/14/2017)

 Enhancements:
 - Added support for update function of Innovation Engine (IE) Firmware.
   Updating System ROM to v1.26 or later is needed to apply IE firmware and
   SPS firmware.

 Problems Fixed:
 - Addressed an issue where the High Performance Event Timer (HPET) was
   reported as "not functioning properly" under Device Manager on Windows(R).

Version:1.22 (09/29/2017)

 Problems Fixed:
 - Addressed an issue where the system would not achieve maximum performance
   results when the BIOS/Platform Configuration (RBSU) Sub-NUMA Clustering
   option is enabled. This option is not enabled by default.

 - Addressed an issue where the system may have the system time incorrectly
   "shifted" to the incorrect time after the operating system has been running
   for an extended period of time. This issue was typically seen under
   Microsoft Windows(R) when the Set Time Automatically option was enabled from
   the Windows Date and Time Settings configuration page.

 - Addressed an issue where the system may report an inaccurate error message
   in the Integrated Management Log (IML) when a memory training failure
   occurred. It is recommended that customers update to this version of the
   system ROM before replacing any DIMMs due to a training issue.

 - Addressed an issue where the system may experience an erroneous boot-time
   message and Integrated Management Log (IML) entry stating that Core Boost
   Technology is disabled due to a lack of an iLO Advanced License (531 - Core
   Boost Technology missing required iLO License) when using the Version 1.20
   System ROM.

--------------------------------------------------------------------------------
[Copyright and Trademark]

All contents on this software are the copyright of NEC Corporation or the
third-party software developer. All other contents mentioned herein are
copyright of their respective owners.

Microsoft, Windows, Windows Server are trademarks or registered trademarks of
Microsoft Corporation in the United States and other countries.
Linux(R) is a registered trademark of Linus Torvalds in the United States and
other countries.
Red Hat is a trademark or a registered trademark of Red Hat Inc. in the United
States and other countries.

All other company names and product names mentioned herein are registered
trademarks or trademarks of their respective owners.

--------------------------------------------------------------------------------
   Copyright NEC Corporation 2018

