Start and Stop Locating a Volume

If the drives that contain the volumes are located in a disk enclosure, you can identify them by making their LEDs blink. Perform these steps to identify the volumes:

  1. Navigate to the Controller Dashboard, click an array name (for example, Array_1).
    Click the icon that corresponds to the array to display its contents.
    The volumes and drives associated with the selected array appear.
  2. Click the volume that you want to locate in the disk enclosure.
  3. Select Actions > Start Locate.
    The LEDs on the drives in the volume start blinking.
  4. To stop the LEDs from blinking, select Actions > Stop Locate.