Procedure for Installing the Module in the Clustering Environment

This document describes the installation procedure of the SigmaSystemCenter
Update Module (SSC0302-0002.zip) for a clustering environment.

The installation procedure assumes the case of using EXPRESSCLUSTER X 3.0.
If you are using other clustering product or EXPRESSCLUSTER with other version,
refer to the outline of the installation procedure -- "Flow of Installing the
Module in the Clustering Environment" -- to install the SigmaSystemCenter 
Update Module to your environment.

<Note>
 When installing SSC components, do not use Terminal Services or other remote
 management software to log on.
 (In Windows Server 2008 R2 and subsequent releases, Terminal Services is renamed
 Remote Desktop Services.)


*******************************************************************************
* Flow of Installing the Module in the Clustering Environment                 *
*******************************************************************************

The flow of installing in the clustering environment is as follows:

 (1) Unzipping the Software (operations on an active and standby server)
 (2) Suspending the Cluster Service (operations on an active server)
 (3) Stopping the Monitoring of Monitored Services 
     (operations on an active server)
 (4) Stopping the Services (operations on an active server)
 (5) Installing the Software (operations on an active server)
 (6) Installing the Software (operations on a standby server)
 (7) Starting the Cluster Service (Resume) (operations on an active server)
 (8) Checking the Start of the Monitoring of the Monitored Services
     (operations on an active server)
 (9) Clearing Web Browser Cache (operations on an active and standby server)
 (10) Start Resource under a Failover Group on a Standby Node Server
 (11) Start Resource under a Failover Group on an Active Node Server
 (12) Installing the Software on the managed machine


*******************************************************************************
* Installation Procedure                                                      *
*******************************************************************************

The detailed installation procedure which assumes the case of using
EXPRESSCLUSTER X 3.0 will be explained below.

===============================================================================
1. Before Starting Installation (Unzipping the Software)
===============================================================================

* Perform this operation both on an active node server and standby node server.

---------------

This software includes the update modules of the following SSC components:

- DeploymentManager

Unzip this software with the following procedure.

* Copy and save the software (SSC0302-0002.zip) in the working
  folder, for example, C:\Temp, in the local drive other than a mirror drive on
  both the active node and standby node servers.

[Notes on Unzipping a .zip File]

  Before unzipping a .zip file, see the notes described in "Notes on Unzipping
  a .zip File" in Release.txt.

 (1) Unzipping the software
     Unzip this software (SSC0302-0002.zip) in an arbitrary folder
     (working folder) in the local drive (C: or D:) both on the active node 
     server and standby node server by right-clicking the file on Explorer
     and clicking [Extract All].


===============================================================================
2. Before Starting Installation (Suspending the Cluster Service)
===============================================================================

* Perform this operation on an active node server.
* This operation is described on the assumption that you use SigmaSystemCenter
  on an active node server.

---------------

While installing this software, the services of the SSC components are stopped.
If consoles or tools of these components are open, end them.
You also need to end and close all applications, such as a Web browser.

 (1) Log on as Administrator to the active node server on which the operation
     is to be performed.

 (2) Launch a browser, and enter "http://localhost:29003/" in the URL box to 
     start Cluster Manager.

 (3) Click [Service] at the top of the Manager window, and click 
     [Suspend Cluster] on the pull-down menu.

 (4) The confirmation dialog box appears. Click [OK] to suspend the service.

     * This process takes for a while.

 (5) Click [OK] if the Error or Warning dialog box appears after a while.

 (6) Check that [Suspended] is displayed in the left pane of the Manager
     window.


===============================================================================
3. Before Starting Installation (Stopping the Monitoring of Monitored Services)
===============================================================================

* Perform this operation on an active node server.

---------------

 (1) Click the [Start] button, click [All Programs], click 
     [ExpressCluster Server], and click [Task Manager].

 (2) Stop all the services displayed under [Application / Service Name]. 
     Set all the displayed services to "Not monitoring" one by one.

     (How to set a service to "Not monitoring")

      - Right-click a displayed service name.
      - Click [Stop Monitoring], and click [OK] on the displayed dialog box.
      - Confirm that the [Monitoring Status] of the monitored service changes
        to "Not monitoring".

 (3) Confirm that all the services are set to "Not monitoring" and end Task
     Manager.


===============================================================================
4. Before Starting Installation (Stopping the Services)
===============================================================================

* Perform this operation on an active node server.

---------------

1. SystemProvisioning

   (1) Stopping the PVMService

       1) Click the [Start] button, click [Control Panel].
          From [Control Panel], double-click [Administrative Tools].
          From [Administrative Tools], double-click [Services] to start the 
          Services dialog box.

       2) From [Services], right-click [PVMService], and click [Stop].



===============================================================================
5. Installing the Software (Operations on the Active Node Servers)
===============================================================================

* Perform this operation on an active node server.

---------------

1. Installation of the DeploymentManager module

[Before Starting Installation]

   Before starting installation of the update module, back up the files, the
   registries and the database of the currently installed DeploymentManager.
   For the procedure, see Subsection "10.4. Backing up and Restoring DPM"
   in SigmaSystemCenter Configuration Guide.

[Installing the DPM Server]

   The operating system does not have to be restarted after installation.

   (1) Log on to a machine
       Log on to the management server (active node server) on which the DPM
       Server is installed with a user with Administrator rights (usually
       Administrator).

   (2) Checking the Version
       Check the version by following the procedures below.

       1) Start the DPM Web Console.

       2) Check that "DeploymentManager 6.2" is displayed
          at the bottom of the DPM Web Console.

       3) After checking, end the DPM Web Console.

   (3) Before update files
       Ensure that no scenario or no automatic update is being executed on 
       the machine on DeploymentManager.
       If there is a scenario that is being executed, wait until the scenario 
       has been completed, or stop the scenario and check that the process of 
       stopping has been completed.
       If there is an automatic update that is being executed, wait until 
       the automatic update has been completed.

   (4) Ending the running applications
       End all the running applications and the Web browser.

   (5) Stopping IIS Admin Service and related services

       1) Click the [Start] button, click [Control Panel]. From [Control Panel],
          double-click [Administrative Tools]. From [Administrative Tools],
          double-click [Services] to start the Services dialog box.

       2) From [Services], right-click [IIS Admin Service], and click [Stop].

         <Note>
          You need to restart the services displayed on the Stop Other Services
          dialog box after installing the update module.
          Make a note of the service name displayed on the Stop Other Services
          dialog box, and click [Yes].

   (6) Executing the Installer

        1) Execute "DPM62100001_MNG.exe" in "SSC0302-0002\DPM\Setup\DPM"
           after unzipping in "1. Before Starting Installation (Unzipping the
           Software)".

           (working folder)\SSC0302-0002\DPM\Setup\DPM\DPM62100001_MNG.exe

           <Remarks>
            If DPM62100001_MNG.exe is executed to an inapplicable version,
            the following messages will appear:

            - "Installed DPM Server is the version that does not support for
               update."

        2) The installer starts to begin installing the module.
           Then, follow the procedures that will be displayed on the
           screen and perform installation.

   (7) Starting the IIS Admin Service

       1) Click the [Start] button, click [Control Panel]. From [Control Panel],
          double-click [Administrative Tools]. From [Administrative Tools],
          double-click [Services] to start the Services dialog box.

       2) From [Services], right-click [IIS Admin Service], and click [Start].

         <Note>
          If the Stop Other Services dialog box appeared in the procedure
          "(5) Stopping IIS Admin Service and related services", start 
          the services manually that you noted after starting up the IIS 
          Admin Service.
          If you cannot click [Start] on a service, press [F5] on the Services
          dialog box to update the display.

   (8) Checking the version after installation
       After installation, check the version by following the procedures below.

       1) Start the DPM Web Console.

       2) Confirm that "DeploymentManager 6.21" is displayed at the bottom of
          the DPM Web Console.

       3) After checking, end the DPM Web Console.

   The installation of the DeploymentManager module is completed.


2. SystemProvisioning

   (1) Staring PVM Service

       1) Click the [Start] button, click [Control Panel]. From [Control Panel],
          double-click [Administrative Tools]. From [Administrative Tools],
          double-click [Services] to start the Services dialog box.

       2) From [Services], right-click [PVMService], and click [Start].


===============================================================================
6. Installing the Software (Operations on the Standby Node Servers)
===============================================================================

* Perform this operation on a standby node server.

---------------

1. Installation of the DeploymentManager module

[Before Starting Installation]

  - Before starting installation of the update module, back up the files, the
    registries and the database of the currently installed DeploymentManager.
    For the procedure, see Subsection 10.4, "Backing up and Restoring DPM"
    in SigmaSystemCenter Configuration Guide.

[Installing the DPM Server]

   The operating system does not have to be restarted after installation.

   (1) Log on to a management server (standby node server)
       Log on to the management server (standby node server) on which the DPM
       Server is installed with a user with Administrator rights (usually
       Administrator).

   (2) Check the Version
       Check the version by following the procedures below.

       1) Click the [Start] button, and click [Run].

       2) Enter "regedit" and start the registry editor by clicking [OK].

       3) Check that [Value data] in the following registry is "6.20.000".

          - For x86 OS:
            Key   : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
                    \CurrentVersion\Uninstall
                    \{B9FC2211-6E29-4EA9-AB3E-157BCB7DA5E2}
            Name  : DisplayVersion

          - For x64 OS:
            Key   : HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft
                    \Windows\CurrentVersion\Uninstall
                    \{B9FC2211-6E29-4EA9-AB3E-157BCB7DA5E2}
            Name  : DisplayVersion

       4) After checking, end the registry editor.

   (3) Before update files
       Ensure that no scenario or no automatic update is being executed on 
       the machine on DeploymentManager.
       If there is a scenario that is being executed, wait until the scenario 
       has been completed, or stop the scenario and check that the process of 
       stopping has been completed.
       If there is an automatic update that is being executed, wait until 
       the automatic update has been completed.

   (4) End the running applications
       End all the running applications and the Web browser.

   (5) Stopping IIS Admin Service and related services

       1) Click the [Start] button, click [Control Panel]. From [Control Panel],
          double-click [Administrative Tools]. From [Administrative Tools],
          double-click [Services] to start the Services dialog box.

       2) From [Services], right-click [IIS Admin Service], and click [Stop].

         <Note>
          You need to restart the services displayed on the Stop Other Services
          dialog box after installing the update module.
          Make a note of the service name displayed on the Stop Other Services
          dialog box, and click [Yes].

   (6) Execute the Installer

       1) Start the command prompt and go to "SSC0302-0002\DPM\Setup\DPM" 
          after unzipping in "1. Before Starting Installation (Unzipping
          the Software)".
          Execute "DPM62100001_MNG.exe" with the parameters as follows.

          (working folder)\ SSC0302-0002\Setup\DPM\ DPM62100001_MNG.exe
          NODB=1 NOSERVICE=1 NOREGISTRY=1 NOSHAREDISKDATA=1

          * Though it is described by two lines, execute by one line.

       2) The installer starts to begin installing the module.
          Then, follow the procedures that will be displayed on the
          screen and perform installation.

   (7) Starting the IIS Admin Service

       1) Click the [Start] button, click [Control Panel]. From [Control Panel],
          double-click [Administrative Tools]. From [Administrative Tools],
          double-click [Services] to start the Services dialog box.

       2) From [Services], right-click [IIS Admin Service], and click [Start].

         <Note>
          If the [Stop Other Services] dialog box appeared in the procedure "(5)
          Stopping IIS Admin Service and related services", start the services
          manually that you noted after starting up the IIS Admin Service.
          If you cannot click [Start] on a service, press [F5] on the Services
          dialog box to update the display.

   (8) Check the version after installation 
       After installation, check the version by following the procedures below.

       1) Click the [Start] button, and click [Run].

       2) Enter "regedit" and start Registry Editor by clicking [OK].

       3) Check that [Value data] in the following registry is "6.21.000".

          - For x86 OS:
            Key   : HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
                    \CurrentVersion\Uninstall
                    \{B9FC2211-6E29-4EA9-AB3E-157BCB7DA5E2}
            Name  : DisplayVersion

          - For x64 OS:
            Key   : HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft
                    \Windows\CurrentVersion\Uninstall
                    \{B9FC2211-6E29-4EA9-AB3E-157BCB7DA5E2}
            Name  : DisplayVersion

       4) After checking, end the registry editor.

   The installation is of the DeploymentManager module completed.


===============================================================================
7. Starting the Cluster Service (Resume)
===============================================================================

* Perform this operation on an active node server.

---------------

 (1) Log on as Administrator to the active node server on which the operation
     is to be performed.

 (2) Launch a browser, and enter "http://localhost:29003/" in the URL box to
     start Cluster Manager.

 (3) Click [Service] at the top of the Manager window, and click 
     [Resume Cluster] on the pull-down menu.

 (4) The confirmation dialog box appears. Click [OK].

 (5) After a while, the clustering configuration is displayed in the left pane
     of the Manager window. Check that all the icons are green, which means
     normal.

 (6) Proceed to the next operation without ending Cluster Manager.


===============================================================================
8. Checking the Start of the Monitoring of the Monitored Services
===============================================================================

* Perform this operation on an active node server.

---------------

 (1) Click the [Start] button, click [All Programs], click 
     [ExpressCluster Server], and click [Task Manager].

 (2) Check that the [Monitoring Status] of all the monitored services under
     [Application / Service Name] are "Monitoring".

     If a service is not "Monitoring", right-click the service, click 
     [Start Monitoring], and click [OK] on the displayed dialog box to start 
     the monitoring.

 (3) Confirm that all the services are set in "Monitoring" and end Task
     Manager.


===============================================================================
9. Clearing Web Browser Cache
===============================================================================

* Perform this operation both on an active node server and standby node server.

* Clear your browser cache on a computer terminal on which to start a browser.
  The method to clear the browser cache differs depending on the kind of
  browsers.
  Check and execute the method of your browser.
  The methods of the two main browsers are as follows:

---------------

 - For Internet Explorer 8 or Internet Explorer 9

   1) On Internet Explorer, from the [Tools] menu, click [Internet Options].

   2) On the [Internet Options] dialog box, click the [General] tab and 
      click [Delete] under [Browsing History].

   3) The "Delete Browsing History" dialog box appears.
      Check [Temporary Internet File] and click [Delete].

 - For Firefox 4.0

   1) On Firefox, from the [Tools] menu, click [Clear Recent History].

   2) The "Clear Recent History" dialog box appears. Select [Everything] in 
      the [Time range to clear] list.
      Confirm that the [Cache] and [Cookie] check boxes are selected under 
      [Details].

   3) Click [Clear Now].


===============================================================================
10. Start Resource under a Failover Group on a Standby Node Server
===============================================================================

* Perform this operation on an active node server.

---------------

 (1) Right-Click [failoverxxx] in [Groups] folder which is located on the left 
     pane of the WebManager window, and select [Move] in the pop-up menu.

 (2) Select a destination standby node server to move resources (Failover) on 
     the Select Server (Move Group) window, and click [OK].

     * This process takes for a while.

 (3) Check that all the "Resource Status" of standby node server, which are 
     displayed in the right pane on the Manager window, are "Online".


===============================================================================
11. Start Resource under a Failover Group on an Active Node Server
===============================================================================

* Perform this operation on an active node server.

---------------

 (1) Right-Click [failoverxxx] in [Groups] folder which is located on the left 
     pane of the WebManager window, and select [Move] in the pop-up menu.

 (2) Select a destination active node server to move resources (Failback) on 
     the Select Server (Move Group) window, and click [OK].

     * This process takes for a while.

 (3) Check that all the "Resource Status" of standby node server, which are 
     displayed in the right pane on the Manager window, are "Online".


===============================================================================
12. Installing the Software on the managed machine
===============================================================================

* When you install the update module of the DPM Server, DPM Client must be 
  updated.


 (1) Perform the update of the DPM Client, seeing the following procedure of
     "2. Installation of the DeploymentManager module" in Install.txt. 

     - Installing the DPM Client (Windows)

The installation of the software is now complete.



