SigmaSystemCenter 3.4 Update Module (SSC0304-0011.zip) 

Patch Name         : SSC0304-0011
Patch Description  : A module to fix problems in SigmaSystemCenter 3.4.
Release Date       : Sep/29/2017
File Name          : SSC0304-0011.zip
Target Product     : SigmaSystemCenter 3.4
Target Versions of Components *1:
  SigmaSystemCenter Version: 3.4-29088, SystemProvisioning 6.4.0012
Necessary Patch    : 
  SigmaSystemCenter: SSC0304-0004
Reboot             : N/A
Patches Contained in This Patch: SSC0304-0005, SSC0304-0006, SSC0304-0007, SSC0304-0008, SSC0304-0009

*1) How to check target versions of components

    - SigmaSystemCenter and SystemProvisioning
      A version is displayed at the bottom of the Web Console.

      Target Version:
       "Version: 3.4-29088, SystemProvisioning 6.4.0012"
       (SigmaSystemCenter 3.4 SSC0304-0004 is already applied.)


This update module incorporates the following fixes in SigmaSystemCenter 3.4.

1. Fixed Problems

1.1. Fixed Problems in SystemProvisioning

(1) Fixed the problem that the "ssc show machine" command become sluggish.
    (#19199)

(2) Fixed the problem that the VM Evacuation feature cannot correctly select
    the machines which execute reboot operation. (#20015)

(3) Fixes the problem that the reference manipulating of using a Smart Group may fail. (#19101)

(4) Fixed the problem that timeout occurs intermittently when multiple
    virtual machine servers are restarted at the same time. (#19369)

(5) Fixed the problem that use replicas of other templates when creating
    templates by replica reuse. (#19388)

(6) Fixed the problem that normal disk becomes failure state by total recover
    diagnosis. (#19468)


===============================================================================
Installation Procedures and Release Modules List
===============================================================================

For the procedures to unzip and install this software, other information 
regarding installation, and release modules list, see Install.txt.

In addition, if you set up SigmaSystemCenter components in a clustering 
environment, see Clustering.txt for the installation procedures in a clustering
environment.


===============================================================================
Notes on Unzipping a .zip File
===============================================================================

[Notes 1]

 Before unzipping the zip file of this software, confirm and delete the ZoneID
 information with the following procedure.
 If you unzip the zip file and install the software with the ZoneID 
 information, the module after installing the software will not work properly.

 The information called "ZoneID" has been added to a file downloaded 
 from a site in a zone configured other than [Intranet] on Internet Explorer 
 of Windows Vista, Windows XP Service Pack 2 or later, 
 or Windows Server 2003 Service Pack 1 or later.

 If ZoneID is added to the zip file, the ZoneID information is succeeded to a
 deployed file and a warning of security is displayed when executing the file,
 consequently, services or processed may not start.

 (1) Checking and changing the policy setting (Hide mechanisms to remove zone
     information):

     1) Click the [Start] button, and click [Run].

     2) Enter "gpedit.msc", and click [OK].

     3) The Group Policy Object Editor dialog box appears. Click [User
        Configuration], click [Administrative Templates], double-click 
        [Windows Components], and double-click [Attachment Manager].

     4) Check the [State] of [Hide mechanisms to remove zone information].
        If it is "Enabled," click [Disabled] on the Hide mechanisms to remove
        zone information Properties dialog box, and click [OK].
        If it is "Disabled" or "Not Configured," you do not need to change 
        the setting.

 (2) Deleting the ZoneID information of the zip file:

     1) Open the properties dialog box of the zip file, and click the [General]
        tab.

     2) If the following message is displayed, click [Unblock], and click [OK].

          Security:  This file came from another 
                     computer and might be blocked to
                     help protect this computer.

 (3) Changing the policy setting (Hide mechanisms to remove zone information):
     If you changed the policy setting (Hide mechanisms to remove zone
     information) from "Enabled" to "Disabled," configure it to "Enabled" with
     the same procedure.

[Notes 2]

  When unzipping the zip file of this software, specify a path whose length is 
  not over 80 bytes as the path to extract.
  If you specify a path whose length is over 80 bytes, the zip file might
  not be extracted properly. 


--------------------------------------------------------------------------------
[Terms of Use]

Terms for use of this update module conform to "NEC Software License Agreement"
of the product to which this software will be applied.


--------------------------------------------------------------------------------
[Trademark and Copyright Information]

All rights reserved. Copyright in this software is owned by NEC Corporation.

* All other brands and products used in this document are the trademarks or
  registered trademarks of their respective trademark holders.
--------------------------------------------------------------------------------
   Copyright NEC Corporation 2017
