===============================================================================
Installation Procedure
===============================================================================

This software includes the update modules of the following SSC components:

 - SystemProvisioning
 - System Monitor - Performance Monitoring Services

Unzip and install this software with the following procedure.

<Note>
 - If you configure the SSC components in a clustering environment, see 
   the Clustering.txt (Procedures for Installing the Module in the Clustering
   Environment) for the installation procedure.

 - When installing SSC component modules in the Terminal Server environment,
   see "Procedures for Installing the Module in the Terminal Server Environment."
   (In Windows Server 2008 R2 and subsequent releases, Terminal Services is
   renamed Remote Desktop Services.) 

 - All updating modules of SSC components, which were installed in the original
   management server, should be applied. Partial updating is not supported.

 - If you logged in with a different user from the installed user, see "Notes 
   When Logging In with a Different User from the Installed User."


 [Before Starting Installation]

  - The software requires about 30 minutes to apply.

  - By installing this software, the services of the SSC components are
    stopped.
    Make sure that it does not hinder your system operation when installing
    this software.

 [Notes on Unzipping a .zip File]

  Before unzipping a .zip file, see the notes described in "Notes on Unzipping
  a .zip File" in Release.txt.

 [Flow of Installation Procedure]

  The flow of installing the SSC components in the management server is as follows. 

    (1) Before Starting Installation (Stopping the Services)
        Before starting installing the update module, stop the following
        service:

        - PVMService
        - System Monitor Performance Monitoring Service

    (2) Installation of the System Monitor - Performance Monitoring Services module

    (3) Installation of the SystemProvisioning module


1. Before Starting Installation (Stopping the Services)

 1-1. SystemProvisioning

    (1) Checking the version of SystemProvisioning
        Check the version of your product with the following procedure:

        1) Start a Web browser.

        2) Enter the following URL in the Address box on the Web browser.
           http://localhost/Provisioning/Default.aspx

        3) The SigmaSystemCenter Web Console starts and the Login window 
           appears.
           Check that the following versions are displayed at the bottom of 
           the SigmaSystemCenter Web Console.

           "Version: 3.5-29023, SystemProvisioning 6.5.0010"

    (2) Ending the SigmaSystemCenter Web Console

        1) End the SigmaSystemCenter Web Console.

    (3) Stopping the PVMService

        1) Click the [Start] button, click [Control Panel]. From 
           [Control Panel], double-click [Administrative Tools]. From 
           [Administrative Tools], double-click [Services] to start the 
           Services dialog box.

        2) From [Services], right-click [PVMService], and click [Stop].


 1-2. System Monitor - Performance Monitoring Services

    (1) Checking the version of System Monitor - Performance Monitoring 
        Services
        Check the version of your product with the following procedure:

        1) Click the [Start] button, select [All Programs]. 
           From [All Programs], select [SigmaSystemCenter]. From 
           [SigmaSystemCenter], select [System Monitor Management Console] 
           to start the management console of System Monitor - Performance 
           Monitoring Services.

        2) The Logon window appears.
           Click [Cancel].

        3) Click the [Help] menu, select [Version Information] to display 
           the Version Information window.

        4) Check that the following versions are displayed at the Version.

           "5.7.1034.0"

    (2) Ending active applications
        Close the management console of System Monitor - Performance
        Monitoring Services and data management tool.

    (3) Stopping the System Monitor Performance Monitoring Service

        1) Click the [Start] button, click [Control Panel]. From 
           [Control Panel], double-click [Administrative Tools]. From 
           [Administrative Tools], double-click [Services] to start the 
           Services dialog box.

        2) From [Services], right-click
           [System Monitor Performance Monitoring Service], and click [Stop].


---------------

2. Installation of the System Monitor - Performance Monitoring Services module

 [Before Starting Installation]

  - Before starting installation of the update module, back up the files and
    the database of the currently installed System Monitor - Performance
    Monitoring Services.
    For the procedure, see Subsection 10.3, "Backing up and Restoring System 
    Monitor - Performance Monitoring Services" in SigmaSystemCenter
    Configuration Guide.

 [Installation Procedure]

  (1) Log on to a management server
      Log on to the management server on which System Monitor - Performance
      Monitoring Services is installed with a user with Administrator rights
      (usually Administrator).

  (2) Ending active applications
      End all using applications.
      Close the management console of System Monitor - Performance Monitoring
      Services and data management tool.

  (3) Unzipping the software
      Copy this software (SSC0305-0001.zip) to an arbitrary folder on 
      the management server on which System Monitor - Performance Monitoring
      Services is installed, and unzip the software.

  (4) Running the installer

      1) Run "Update.bat" stored in "SSC0305-0001\RMP" folder in the 
         folder unzipped SSC0305-0001.zip.

         (working folder)\SSC0305-0001\RMP\Update.bat

      2) Installing the module starts.
         Follow the instruction on the screens to install.

  (5) Starting the System Monitor Performance Monitoring Service

      1) Click the [Start] button, click [Control Panel]. From [Control Panel],
         double-click [Administrative Tools]. From [Administrative Tools],
         double-click [Services] to start the Services dialog box.

      2) From [Services], right-click
         [System Monitor Performance Monitoring Service], and click [Start].

  (6) Checking the version after applying the software
      Check the version after applying the module with the following procedure:

      1) Click the [Start] button, select [All Programs]. From [All Programs],
         select [SigmaSystemCenter]. From [SigmaSystemCenter],
         select [System Monitor Management Console] to start the management
         console of System Monitor - Performance Monitoring Services.

      2) The Logon window appears.
         Click [Cancel].

      3) Click the [Help] menu, select [Version Information] to display the
         Version Information window.

      4) Check that "5.7.1035.1" is displayed at the Version.

 Installing the module of System Monitor - Performance Monitoring Services 
 is complete.
 You do not need to restart the OS.


---------------

3. Installation of the SystemProvisioning module

 [Before Starting Installation]

  - Before starting installation of the update module, back up the files, the
    registries, and the database of the currently installed SystemProvisioning.
    For the procedure, see Subsection 10.2, "Backing up and Restoring 
    SystemProvisioning" in NEC SigmaSystemCenter Configuration Guide.

    <Note>
    - If you change the default setting of the conf folder in the following 
      registry, back up the files under the conf folder.

       Key: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\NEC\PVM
       Name: ConfPath

 [Installation Procedure]

 (1) Log on to a management server
     Log on to the management server on which SystemProvisioning is installed 
     as a user with Administrator privileges (usually Administrator).

 (2) Ending active applications
     End all using application and close all Web browsers. 
     Close the SigmaSystemCenter Web Console as well.

 (3) Stopping IIS Admin Service and related services

     1) Click the [Start] button, click [Control Panel]. From [Control Panel], 
        double-click [Administrative Tools]. From [Administrative Tools], 
        double-click [Services] to start the Services dialog box.

     2) From [Services], right-click [IIS Admin Service], and click [Stop].

     <Note>
     You need to restart the services displayed on the Stop Other Services 
     dialog box after installing the update module.
     Make a note of the service name displayed on the Stop Other Services 
     dialog box, and click [Yes], and click [Yes].

 (4) Unzipping the Software
     Copy this software (SSC0305-0001.zip) to an arbitrary folder on 
     the management server on which SystemProvisioning is installed, and unzip 
     the software.

 (5) Running the Installer

     1) Run "Setup.exe" which is stored in the "SSC0305-0001\PVM" 
        folder, located under the unzipped folder.

        (working folder)\SSC0305-0001\PVM\Setup.exe

     2) The message "Are you sure you want to install?" appears.
        Click [Yes].

     3) The module of SystemProvisioning is applied.
        The message "Installation completed." appears.
        Click [OK].

 (6) Starting the IIS Admin Service

     1) Click the [Start] button, click [Control Panel]. From [Control Panel],
        double-click [Administrative Tools]. From [Administrative Tools], 
        double-click [Services] to start the Services dialog box.

     2) From [Services], right-click [IIS Admin Service], and click [Start].

     <Note>
     If the [Stop Other Services] dialog box appeared in the procedure 
     "(3) Stopping IIS Admin Service and related services," start the services
     manually that you noted after starting up the IIS Admin Service.
     In addition, some services are started when the PVMService is started.
     If you cannot click [Start] on a service, press [F5] on the Services 
     dialog box to update the display.

 (7) Checking the version after installing the software
     Check the version after installing the module with the following 
     procedure.

     1) Start a Web browser.

     2) Enter the following URL in the Address box on the Web browser.
        http://localhost/Provisioning/Default.aspx

     3) The SigmaSystemCenter Web Console starts.
        Check that "Version: 3.5-29162, SystemProvisioning 6.5.0011" is 
        displayed at the bottom of the SigmaSystemCenter Web Console.

     4) End the Web browser without logging in.

 [After Completing Installation]

  - After installation of the update module, the following files are
    overwritten with the initial files of this update module.

    If you had modified the files before installing this update module,
    modify the files again after the installation.

    Under the SystemProvisioning installation folder
      (Default Path: %ProgramFiles(x86)%\NEC\PVM)

      Provisioning\Web.config

  - Clear your browser cache on a computer terminal on which to start a 
    browser. The method to clear the browser cache differs depending on the 
    kind of browsers. Check and execute the method of your browser.
    The methods of the two main browsers are as follows:

    - For Internet Explorer 10

      1) On Internet Explorer, from the [Tools] menu, click [Internet Options].

      2) On the [Internet Options] dialog box, click the [General] tab and
         click [Delete] under [Browsing History].

      3) The [Delete Browsing History] dialog box appears. 
         Check [Temporary Internet File] and click [Delete].

    - For Firefox 44

      1) On Firefox, from the [History] menu, click [Clear Recent History...].

      2) The [Clear Recent History] dialog box appears.
         Select [Everything] in the [Time range to clear] list.
         Confirm that the [Cache] and [Cookie] check boxes are selected under
         [Details].

      3) Click [Clear Now].

 The installation of the SystemProvisioning module is now complete.
 You do not need to restart the operating system.


===============================================================================
Procedures for Installing the Module in the Terminal Server Environment
===============================================================================
Perform one of these operations below for the installation in the Terminal
Server environment.

[Installation Procedure #1]

 - For Windows Server 2008 R2 / Windows Server 2012 / Windows Server 2012 R2 
   Installing the module in use of [Install Application on Remote Desktop
   Server] in [Control Panel].

[Installation Procedure #2]

  1) Open the Command Prompt window.
  2) Run the following the command.
      change user /install
  3) Start the installation process of the component module in the
     Command Prompt.
  4) Run the following the command.
      change user /execute


===============================================================================
Notes When Logging On with a Different User from the Installed User
===============================================================================
When you install patches to the following components during logging on the user
that is different from the one who installed SigmaSystemCenter, the 
installation may fails.

 - SystemProvisioning
 - System Monitor - Performance Monitoring Services

In this case, you must take one of the following solutions:

<Solution 1>
  Log on with the installed user and then install the patch.

<Solution 2>
  Follow the instructions to give database access permission to the log-on user
  before installing the patch.

    1. Check if the following commands results contain the log-on user.

       sqlcmd -E -S .\SSCCMDB
       1> select name from sys.syslogins
       2> go

    2. If not contain, run the following commands:

       <SSCCMDB>
       - For SQL Server 2012 and SQL Server 2014, log in the user who installed 
         the SQL Server instance before running the commands.

         sqlcmd -E -S (local)\SSCCMDB
         1> CREATE LOGIN [SSC Management Server Name\User Name] FROM WINDOWS
         2> go
         1> ALTER SERVER ROLE [sysadmin] ADD MEMBER [SSC Management Server Name\User Name]
         2> go

       - For SQL Server 2008 R2 or earlier.

         sqlcmd -E -S (local)\SSCCMDB
         1> exec master..sp_addsrvrolemember @loginame = N'SSC Management Server Name\User Name', @rolename = N'sysadmin'
         2> go


===============================================================================
Uninstallation Procedure
===============================================================================
If you uninstall components after installing this patch, perform the following 
procedure.

<Note>
 You cannot uninstall only this update patch.
 To restore the computer to the state it was in before the application of
 the patch, uninstall components with the following procedure first, 
 then reinstall them, and restore the data you backed up before starting 
 patch installation.

1. Uninstallation of the SystemProvisioning module

 [How to uninstall the SystemProvisioning module]

  (1) Uninstall SystemProvisioning with reference to Section 4, "Uninstalling
      SigmaSystemCenter" in SigmaSystemCenter Installation Guide. 

  (2) Delete the SystemProvisioning installation folder.
      The installation folder, by default, is 
      "%ProgramFiles(x86)%\NEC\PVM" for x64 OS.


2. Uninstallation of the System Monitor - Performance Monitoring Services module

   Uninstall the following SSC components after the update module is installed
   according to the usual uninstallation procedure. 

   - System Monitor - Performance Monitoring Services

   For the procedure, see Section 4, "Uninstalling SigmaSystemCenter" in 
   SigmaSystemCenter Installation Guide.


===============================================================================
Release Modules List
===============================================================================

The modules released with this software are as follows:

The dates and times for the files of the following SSC components are not 
dependent on the time zone settings of your OS:
 - SystemProvisioning
They are displayed as listed below.

Those of System Monitor - Performance Monitoring Services are listed in
Coordinated Universal Time (UTC).

The following files overwrite the existing files.

1. System Monitor - Performance Monitoring Services

   In the System Monitor - Performance Monitoring Services installation folder
   (The default installation folder: %ProgramFiles(x86)%\NEC\
    SystemMonitorPerformance\)

   bin\
   RM_PFMCONSOLE.exe                      2,048,000 bytes   05/27/2016 10:34 AM
   rm_databasecfg.exe                        43,520 bytes   05/27/2016 10:34 AM
   rm_datamanagetool.exe                    121,344 bytes   05/27/2016 10:34 AM
   ssc-perf.exe                              67,584 bytes   05/27/2016 10:34 AM
   rm_pfmservice.exe                         24,576 bytes   05/27/2016 10:34 AM
   rm_server.dll                          2,027,520 bytes   05/27/2016 10:34 AM
   rm_client.dll                             86,016 bytes   05/27/2016 10:34 AM
   rm_w32wrapper.dll                         16,384 bytes   05/27/2016 10:34 AM
   rm_svif.dll                              114,688 bytes   05/27/2016 10:34 AM

2. SystemProvisioning

   In the SystemProvisioning installation folder
   (The default installation folder: %ProgramFiles(x86)%\NEC\PVM\)

   bin\ja\
   FundamentalParts.resources.dll          165,888 bytes   06/24/2016  10:18 AM
   HyperVProvider.resources.dll             54,784 bytes   06/24/2016  10:22 AM
   ReportDocument.resources.dll              6,144 bytes   06/24/2016  10:18 AM
   ssc.resources.dll                       494,592 bytes   06/24/2016  10:22 AM
   StorageProvider.resources.dll            35,328 bytes   06/24/2016  10:22 AM
   VimApi.resources.dll                      3,072 bytes   06/24/2016  10:22 AM
   VMwareProvider.resources.dll             59,392 bytes   06/24/2016  10:22 AM

   bin\
   CookComputing.XmlRpcV2.dll              110,592 bytes   06/24/2016  10:17 AM
   DocumentFormat.OpenXml.dll            5,803,008 bytes   06/24/2016  10:17 AM
   FundamentalParts.dll                  1,045,504 bytes   06/24/2016  10:18 AM
   HyperVProvider.dll                      870,400 bytes   06/24/2016  10:22 AM
   ICSharpCode.SharpZipLib.dll             204,800 bytes   06/24/2016  10:17 AM
   intl.dll                                152,489 bytes   06/24/2016  10:17 AM
   Ionic.Zip.dll                           462,336 bytes   06/24/2016  10:17 AM
   libgcrypt-11.dll                        640,555 bytes   06/24/2016  10:17 AM
   libgnutls-26.dll                        903,076 bytes   06/24/2016  10:17 AM
   libgpg-error-0.dll                       81,756 bytes   06/24/2016  10:17 AM
   libiconv-2.dll                        1,023,578 bytes   06/24/2016  10:17 AM
   libportablexdr-0.dll                     85,365 bytes   06/24/2016  10:17 AM
   libtasn1-6.dll                          125,874 bytes   06/24/2016  10:17 AM
   libvirt-0.dll                         2,640,562 bytes   06/24/2016  10:17 AM
   libvirt-lxc-0.dll                        27,870 bytes   06/24/2016  10:17 AM
   libvirt-qemu-0.dll                       26,432 bytes   06/24/2016  10:17 AM
   libxml2-2.dll                         1,721,519 bytes   06/24/2016  10:17 AM
   log4net.dll                             270,336 bytes   06/24/2016  10:16 AM
   ManageOntap.dll                          81,920 bytes   06/24/2016  10:17 AM
   Renci.SshNet.dll                        451,072 bytes   06/24/2016  10:17 AM
   ReportDocument.dll                      228,864 bytes   06/24/2016  10:18 AM
   Routrek.granados.dll                    143,360 bytes   06/24/2016  10:17 AM
   ssc.exe                               2,990,080 bytes   06/24/2016  10:22 AM
   StorageProvider.dll                     468,480 bytes   06/24/2016  10:22 AM
   VimApi.dll                            2,666,496 bytes   06/24/2016  10:22 AM
   VimApi.XmlSerializers.dll             8,912,384 bytes   06/24/2016  10:16 AM
   VMwareProvider.dll                    1,204,224 bytes   06/24/2016  10:22 AM
   WbemStorageClient.dll                    23,552 bytes   06/24/2016  10:22 AM
   XenServer.dll                           387,584 bytes   06/24/2016  10:17 AM
   zlib1.dll                               118,272 bytes   06/24/2016  10:17 AM

   Provisioning\bin\ja\
   webui.resources.dll                     290,304 bytes   06/24/2016  10:25 AM

   Provisioning\bin\
   App_global.asax.compiled                    303 bytes   06/24/2016  10:25 AM
   App_GlobalResources.compiled                230 bytes   06/24/2016  10:25 AM
   webui.dll                             4,348,928 bytes   06/24/2016  10:25 AM

   Provisioning\
   web.config                                9,353 bytes   06/24/2016  10:22 AM


