===============================================================================
Installation Procedure
===============================================================================

This software includes the update modules of the following SSC components:

 - DeploymentManager

Unzip and install this software with the following procedures:

<Note>
 - If you configure the SSC components in a clustering environment, see 
   the Clustering.txt (Procedures for Installing the Module in the Clustering
   Environment) for the installation procedure.

 - When installing SSC component modules in the Terminal Server environment,
   see "Procedures for Installing the Module in the Terminal Server Environment."
   (In Windows Server 2008 R2 and subsequent releases, Terminal Services is
   renamed Remote Desktop Services.) 

 - All updating modules of SSC components, which were installed in the original
   management server, should be applied. Partial updating is not supported.

 [Before Starting Installation]

  - The software requires about 30 minutes to apply.

  - By installing this software, the services of the SSC components are stopped.
    Make sure that it does not hinder your system operation when installing
    this software.

 [Notes on Unzipping a .zip File]

  Before unzipping a .zip file, see the notes described in "Notes on Unzipping
  a .zip File" in Release.txt.

 [Flow of Installation Procedure]
  
  The installation procedure:

   - For management servers

1. Before Starting Installation (Stopping the Services)

 1-1. SystemProvisioning

    (1) Stopping the PVMService

        1) Click the [Start] button, click [Control Panel]. From 
           [Control Panel], double-click [Administrative Tools]. From 
           [Administrative Tools], double-click [Services] to start the 
           Services dialog box.

        2) From [Services], right-click [PVMService], and click [Stop].

---------------
2. Exchange the DeploymentManager module

 [Exchange the module]

  The OS does not have to be restarted after installation.

  (1) Log on to the machine
      Log on to the machine on which DPM Server is installed by a user
      with administrator authority.

  (2) Check the version (before installing this software)
        1) Select [Run(R)] from [Start].
        2) Input "regedit" and click [OK] to start registry editor.
        3) Check that [Value Data] of the following registry is "6.70.003".
           - key   : HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows
                     \CurrentVersion\Uninstall
                     \{B9FC2211-6E29-4EA9-AB3E-157BCB7DA5E2}
           - value : DisplayVersion
        4) End the registry editor.

  (3) Before updating module
      Check that all DPM operations (the following) are completed or ended.
        - Operations which are being executed for the managed machine
          (scenario execution, automatic update, file distribution, file
          deletion, and obtaining the information on the [File/Folder List]
          screen) are completed.
        - Web Console and DPM tools are ended.
          End all the running Explorer, the Web browser, Event Viewer,
          applications and so on.
          Click the [Start] button, click [Control Panel]. From [Control Panel], 
          double-click [Administrative Tools]. From [Administrative Tools], 
          double-click [Services] to start the Services dialog box. Stop all services 
          whose names begin with "DeploymentManager".

  (4) Ending the running applications
      End all the running applications and the Web browser.

  (5) Unzipping the software
      Copy this software (SSC0307-0006.zip) to an arbitrary folder and unzip 
      the software.

  (6) Exchange the module
        1) Rename these module.
           E<DPM Server installation folder>()\pxemgr.dll
               ύX: pxemgr.dll.org
           E<DPM Server installation folder>()\pxesvc.exe
               ύX: pxesvc.exe.org
           The default installation folder of DPM Server is:
               "C:\Program Files (x86)\NEC\DeploymentManager".

        2) Exchange the module.
           Copy the modules to the 1) folder from (5) folder. 

  (7) After updating module
        Start all services that were stopped at Step (3).

    The installation is completed.

   <Remarks>
    The folder which was copied in (5) is unnecessary after the installation.
    Delete it.


===============================================================================
Procedures for Installing the Module in the Terminal Server Environment
===============================================================================
Perform one of these operations below for the installation in the Terminal
Server environment.

[Installation Procedure #1]

 - For Windows Server 2008 R2 or later
   Installing the module in use of [Install Application on Remote Desktop
   Server] in [Control Panel].

[Installation Procedure #2]

  1) Open the Command Prompt window.
  2) Run the following the command.
      change user /install
  3) Start the installation process of the component module in the
     Command Prompt.
  4) Run the following the command.
      change user /execute


===============================================================================
Notes When You Install Each Component of SigmaSystemCenter Separately on 
Multiple Servers
===============================================================================

Keep in mind the following when you apply the update modules to the components 
of SigmaSystemCenter installed separately on multiple management servers.

 <DeploymentManager>

  When you install a DPM Server on a different machine from a machine on which 
  SigmaSystemCenter is installed, apply the update module to the DPM Server in 
  the following order. This method also applies to when you install multiple 
  DPM Servers on multiple management servers. In this case, apply the update 
  module to all DPM Servers.

  1. Stop the following service in the SigmaSystemCenter management server.
     PVMService
  2. Apply the update module to the DPM Server.


===============================================================================
The procedure to restore before applying modules
===============================================================================
The procedure to restore before applying modules.

1. For DeploymentManager

   For the procedure, see [Flow of Installation Procedure].
   Rename files to the original file name at Step (6).


===============================================================================
Release Modules List
===============================================================================

The modules released with this software are as follows:

The dates and times for the files of the following SSC components are not 
dependent on the time zone settings of your OS:
 - DeploymentManager
They are displayed as listed below.

The following files overwrite the existing files.

1. DeploymentManager

   In the DPM Server folder
   (The default installation folder: %ProgramFiles(x86)%\NEC\DeploymentManager\)
     pxemgr.dll                            125,368 bytes   10/26/2019   12:49 PM
     pxesvc.exe                             79,800 bytes   10/26/2019   12:49 PM

