FC HBA管理ユーティリティ インストール手順書


FC HBAカードの管理情報を採取するため、管理ユーティリティを
インストールしてください。



準備

−Express5800/A1080a-S A1080a-D A1080a-E A1040a サーバ添付の
  EXPRESSBUILDER(Ver6.80-001.XX) を準備願います。
  (Red Hat Enterprise Linux 5 の時のみ)
−インストール作業にはroot権限での作業が必要です。
−以前のバージョンの管理ユーティリティがインストールされている場合、
  アンインストールしてください。
−Netlink(libnl)ライブラリが必要になりますのでlibnlがインストールされていない場合は
  事前にlibnlをインストールしてください。

=================================================================
インストール手順
=================================================================

◎Red Hat Enterprise Linux 5 の時

   @ 管理ユーティリティは「EXPRESSBUILDER」に格納されています。
      以下手順に従い、EXPRESSBUILDERをマウントしてください。

      1) root権限のあるユーザーでログインします。

      2) 光ディスクドライブに「EXPRESSBUILDER」DVDをセットします。

      3) 任意のマウントポイントを作成します。

         mkdir /media/cdrom

      4) 「EXPRESSBUILDER」DVDをマウントします。
         (下記は光ディスクドライブが /dev/sr0 の場合です)

         mount -t iso9660 /dev/sr0 /media/cdrom

   A 以下の手順に従い、管理ユーティリティをインストールしてください。

      1) アプリケーションパッケージを適当な作業ディレクトリに
         コピーしてください。

         mkdir /tmp/mcl
         cd /tmp/mcl
         cp -p /media/cdrom/001/lnx/mcl/elxlinuxapps-4.1a36-8.2.0.33.3p-1-1.tar  .

      2) ファイルを解凍してください。

         tar xvf elxlinuxapps-4.1a36-8.2.0.33.3p-1-1.tar

      3) インストールプログラムを実行してください。

         cd ElxLinuxApps-4.1a36-8.2.0.33.3p-1-1
         ./install

      4) インストールモードの選択が表示されますので、
           1   Local Mode を選んでください。

      5) 「HBAnyware installation complete.」が表示されたらインストールは完了です。

◎Red Hat Enterprise Linux 6 の時

   @ 以下の手順に従い、管理ユーティリティをダウンロードしてください。

      Red Hat Enterprise Linux 6 対応の OneCommand Manager を
      下記のEmulex社のホームページからダウンロードしてください。

      http://www.emulex.com/

      1) 「Downloads」を選択してください。

      2) 「Emulex」を選択してください。

      3) 「Linux Drivers」の中の「RHEL 6.0 - 6.4」を選択してください。

      4) 「Management and Utilities」を選択してください。

      5) 「UCNA and HBA Application Kit」の中の「Application Kit 6.3.12.2-1(GUI)」を選択して
         ダウンロードしてください。

         ※上記は「Version 6.3.12.2-1」の場合です。

   A 以下の手順に従い、管理ユーティリティをインストールしてください。

         ※ここではダウンロードしたファイルが「Version 6.3.12.2-1」の時の手順を示します。

      以下の手順でダウンロードした OneCommand Manager をインストールします。

      1) ダウンロードしたファイルを解凍してください。

         tar zxvf elxocm-rhel5-rhel6-6.3.12.2-1.tgz

      2) インストールプログラムを実行してください。

         cd elxocm-rhel5-rhel6-6.3.12.2-1
         ./install.sh

      3) インストールモードの選択が表示されますので、
         以下のように入力してください。

         Do you want to enable Secure Management feature for OneCommand? (s/u)

         The secure management feature requires OneCommand groups be configured on
         the LDAP network or the local host machine to provide for OneCommand operation.

         Enter 's' to select secure management. (LDAP/NIS OCM group configuration required)
         Enter 'u' to run without secure management (default).

         Enter the letter 's' or 'u': u                            ←※「u」を入力してください。
         You selected: Secure Management Disabled

         Select desired mode of operation for OneCommand Manager

            1   Strictly Local Management : Only manage the adapters on this host.
                                            Management of adapters on this host from other
                                            hosts is not allowed.
            2   Local Management Plus     : Only manage the adapters on this host.
                                            Management of adapters on this host from other
                                            hosts is allowed.
            3   Full Management           : Manage the adapters on this host and other
                                            hosts that allow it.  Management of the adapters
                                            on this host from another host is allowed.
            4   Management Host           : Manage the adapters on this host and other hosts
                                            that allow it.  Management of the adapters on
                                            this host from another host is not allowed.

         Enter the number 1, 2, 3, or 4: 1                         ←※「1」を入力してください。
         You selected: 'Local Only Mode'

         Do you want to allow user to change management mode using
         set_operating_mode script located in /usr/sbin/ocmanager ?

         Enter the letter 'y' if yes, or 'n' if no: n              ←※「n」を入力してください。
         You selected: No

         Do you want to install the sensor kits?
         Enter y to install
         Enter n not to install
         Enter the letter 'y' or 'n': n                            ←※「n」を入力してください。
         Sensor kits will not be installed.

      4) 「OneCommand Manager Enterprise Kit install completed successfully.」が
         表示されたらインストールは完了です。



・Emulex、OneCommand Manager、HBAnywareは米国Emulex Corporationの登録商標または商標です。
・RedHat、Red Hat Enterprise Linuxは、米国Red Hat, Inc.の米国およびその他の国における
  商標または登録商標です。
・EXPRESSBUILDER は日本電気株式会社の登録商標です。



  Copyright NEC Corporation 2013