ページの先頭です。
ここから本文です。

Technical Info.

EXPRESSCLUSTER X Cluster WebUI Offline

Cluster WebUI Offline is a GUI tool to create or edit EXPRESSCLUSTER X / EXPRESSCLUSTER X SingleServerSafe configuration.
Cluster WebUI Offline can perform on a client machine which is offline and does not connect to cluster nodes.
Cluster WebUI Offline is supported for EXPRESSCLUSTER X 4.1 / EXPRESSCLUSTER X SingleServerSafe 4.1 or later.

  • Hereinafter, "EXPRESSCLUSTER X / EXPRESSCLUSTER X SingleServerSafe" are referred to as "EXPRESSXLUSTER".

Index


Cluster WebUI Offline System and Software Requirements

For Cluster WebUI Offline, Node.js and Web browser are required.
After Cluster WebUI Offline module is installed, its service is started via Node.js and you can connect to it with Web browser.

Node.js
10.16.0 or later [22.10.0]
* [] shows the latest version which we have evaluated.

Web browser
Browser
Language
Firefox
English/Chinese/Japanese
Google Chrome
Microsoft Edge (Chromium)
* Cluster WebUI Offline does not support Chinese if its version is 5.3.0-250117-1 or later.

Memory/Disk
Memory 500MB or more
Disk 200MB or more

Notes:
  • As of Node.js version which is later than the version in [] above, we do not evaluate and do not know whether it is compatible with Cluster WebUI Offline. Please note that the version which we have evaluated in our environment may not perform in your environment.
  • In the case that you connect to Cluster WebUI Offline with IP address, the IP address should be registered with [Sites] of Internet Option's [Local Intranet].
  • Mobile devices such as tablets or smart phones are not supported for Cluster WebUI Offline.

Determining EXPRESSCLUSTER and Cluster WebUI Offline version

EXPRESSCLUSTER internal version
  • On Cluster WebUI
    1. Connect to Cluster WebUI with Web browser:
      http://<Cluster nodes IP address>:<Cluster WebUI Port number (default:29003)>
    2. Select [Status] tab and click [Server Properties] button of each nodes.
    3. Internal version will be shown.
  • From EXPRESSCLUSTER command line
    1. Log on to cluster nodes.
    2. Execute the following command:
      clpstat --sv --detail
    3. Internal version will be shown.

Cluster WebUI Offline version
  1. Start Cluster WebUI Offline.
  2. Click [Application information] button in Tool bar.
  3. Cluster WebUI version will be shown.

Download

Download Cluster WebUI Offline module which is compatible with running EXPRESSCLUSTER version by referring the compatibility matrix below.
Note:
  • If you use Cluster WebUI Offline which version is not compatible with running EXPRESSCLUSTER version, Cluster WebUI Offline may not perform.

EXPRESSCLUSTER
Internal version
Cluster WebUI Offline
version
Download
Last update
EXPRESSCLUSTER X for Windows
13.30
5.3.0-250117-1
April 8th, 2025
13.21
13.20
5.2.1-240617-1
July 12th, 2024
13.12
13.11
13.10
5.1.1-230601-1
November 17th, 2023
13.02
13.01
13.00
5.0.2-220630-1
November 4th, 2022
12.34
12.33
12.32
12.30
4.3.2-210913-1
October 15th, 2021
12.22
12.20
4.2.2-200515-1
April 9th, 2021
12.12
12.11
4.1.1.190701-1
August 1st, 2019
EXPRESSCLUSTER X for Linux
5.3.0-1
5.3.0-250117-1
April 8th, 2025
5.2.1-1
5.2.0-1
5.2.1-240617-1
July 12th, 2024
5.1.2-1
5.1.1-1
5.1.0-1
5.1.1-230601-1
November 17th, 2023
5.0.2-1
5.0.1-1
5.0.0-1
5.0.2-220630-1
November 4th, 2022
4.3.4-1
4.3.3-1
4.3.2-1
4.3.0-1
4.3.2-210913-1
October 15th, 2021
4.2.2-1
4.2.0-1
4.2.2-200515-1
April 9th, 2021
4.1.2-1
4.1.1-1
4.1.1.190701-1
August 1st, 2019
EXPRESSCLUSTER X SingleServerSafe for Windows
13.30
5.3.0-250117-1
April 8th, 2025
13.21
13.20
5.2.1-240617-1
July 12th, 2024
13.12
13.11
13.10
5.1.1-230601-1
November 17th, 2023
13.02
13.01
13.00
5.0.2-220630-1
November 4th, 2022
12.34
12.33
12.32
12.30
4.3.2-210913-1
October 15th, 2021
12.22
12.20
4.2.2-200515-1
April 9th, 2021
12.12
12.11
4.1.1.190701-1
August 1st, 2019
EXPRESSCLUSTER X SingleServerSafe for Linux
5.3.0-1
5.3.0-250117-1
April 8th, 2025
5.2.1-1
5.2.0-1
5.2.1-240617-1
July 12th, 2024
5.1.2-1
5.1.1-1
5.1.0-1
5.1.1-230601-1
November 17th, 2023
5.0.2-1
5.0.1-1
5.0.0-1
5.0.2-220630-1
November 4th, 2022
4.3.4-1
4.3.3-1
4.3.2-1
4.3.0-1
4.3.2-210913-1
October 15th, 2021
4.2.2-1
4.2.0-1
4.2.2-200515-1
April 9th, 2021
4.1.2-1
4.1.1-1
4.1.1.190701-1
August 1st, 2019

Installation and operation

Refer "Setup Guide" for Cluser WbUI Offline installation.
Start Cluster WebUI Offline and click [Online Manual] button on Cluster WebUI Offline for its operation.

Note:
  • To export from or apply cluster configuration to a running EPRESSCLUSTER without Cluster WebUI, you cannot use Cluster WebUI Offline but need to use clpcfctrl command.
    For clpcfctrl command, refer EXPRESSCULSTER manuals:

Uninstallation

Refer "Setup Guide".

Notices and limitations

  • You cannot use the cluster configuration data that was created by using EXPRESSCLUSTER X higher than EXPRESSCLUSTER X in use.
  • In the case that you use EXPRESSCLUSTER below, you cannot use a cluster configuration of the EXPRESSCLUSTER with Cluster WebUI Offline.
    • EXPRESSCLUSTER X 1.0/2.0/2.1/3.0/3.1/3.2/3.3/4.0 for Windows
    • EXPRESSCLUSTER X 1.0/2.0/2.1/3.0/3.1/3.2/3.3/4.0 for Linux
    • EXPRESSCLUSTER X 1.0/2.0/2.1/3.0/3.1/3.2/3.3/4.0 for Solaris
    • EXPRESSCLUSTER X SingleServerSafe 1.0/2.0/2.1/3.0/3.1/3.2/3.3/4.0 for Windows
    • EXPRESSCLUSTER X SingleServerSafe 1.0/2.0/2.1/3.0/3.1/3.2/3.3/4.0 for Linux
  • Cluster WebUI Offline cannot collect information of disks on the server installed EXPRESSCLUSTER X for Windows. Therefore, disk or HBA settings cannot be configured with Cluster WebUI Offline but configured by Cluster WebUI.
  • Refer EXPRESSCLUSTER manuals for more notices and limitations:

Product Name

CLUSTERPRO X
CLUSTERPRO X SingleServerSafe

Product Information

Product name: EXPRESSCLUSTER X for Windows
Product name: EXPRESSCLUSTER X for Linux
Product name: EXPRESSCLUSTER X SingleServerSafe for Windows
Product name: EXPRESSCLUSTER X SingleServerSafe for Linux
  • Content ID: 4140100109
  • Release date: 2019/09/25
  • Last updated:2025/04/08

Top

ここからページ共通メニューです。 ページ共通メニューを読み飛ばす。
ページ共通メニューここまで。